tazz4843 / diy-weather-station

DIY weather station made with RPi Pico and Rust for fancy visualizations

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

DIY Weather Station

A weather station packed to the brim with features. Tracks temperature, humidity, pressure, wind speed, wind direction, rain, UV, light, and (in the future) air quality, Earth's magnetic field, and lightning strikes, and collects it into a Prometheus database, where it can be viewed in Grafana.

Setup

I strongly recommend you view the wiki for more details on how to set up the weather station. The following is a quick overview of the setup, but it is not comprehensive.

Hardware

Lots of sensors, a RPi Pico, wires, and some commodity parts. See the wiki for more details.

Software

This repo contains both the firmware for the RPi Pico and the Rust backend that handles collecting and storing the data.

Firmware

This project uses PlatformIO to build and deploy the firmware.

Building

You will need to edit the platformio.ini file to include your WiFi credentials and the IP address of the backend server.

pio run

Backend

The Rust app can run on basically any hardware that can run Prometheus and Grafana, with the ability to communicate with the Pico over WiFi.

Building

cargo build --release

Running

Check out the wiki for more details, including how to run the backend as a systemd service.

Contributing

Contributions are welcome! Please open an issue or PR if you have any questions or suggestions.

License

EUPL-1.2

About

DIY weather station made with RPi Pico and Rust for fancy visualizations


Languages

Language:Rust 100.0%