This is a document to build xorg ports for FreeBSD on RaspberryPi
1: preparation
you must build a FreeBSD RaspberryPi image with option "MALLOC_PRODUCTION=yes". if you miss this option, it will cause to fail building glib20 with jemalloc issue (Failed assertion). if you build your image by crochet-freebsd, you can use option "__MAKE_CONF" to specify your "make.conf".
"WITH_NEW_XORG=yes" is available. if you want, you can set it in "make.conf".
2: getting ports tree
you can build image with preinstalled ports tree to use option "UsrPorts" in crochet-freebsd. or you can get ports tree manually on your RPI.
# portsnap fetch
# portsnap extract
# cd /usr/ports
# make fetchindex
3: applying changes
to complete building, you might need to apply some changes to your ports tree.
(1) x11/xorg-server
this is Aleksandr Rybalko's great job, and he had fixed xorg-server issue for FreeBSD ARM.
# fetch --no-verify-peer https://github.com/rayddteam/x11-servers-xorg-server/archive/master.zip
# unzip master.zip
# rm master.zip
# cd x11-servers-xorg-server-master
# cp -rf * /usr/ports/x11-servers/xorg-server/
# cd ../
(2) x11-drivers/xf86-video-scfb
this is also Aleksandr Rybalko's big work to port xf86-video-scfb driver.
# fetch --no-verify-peer https://github.com/rayddteam/xf86-video-scfb/archive/master.zip
# unzip master.zip
# rm master.zip
# cp -rf xf86-video-scfb-master /usr/ports/x11-drivers/xf86-video-scfb/
(3) x11-font/fontconfig, x11/pixman
by default building, fc-cache, provided x11-fonts/fontconfig, might cause to Segmentation fault (core dumped) on ARM(ports/181372). x11/pixman have building issue on ARM(ports/181140). this repository will fix both issue.
# fetch --no-verify-peer https://github.com/taguchi-ch/freebsd-ports-xorg-raspberrypi/archive/master.zip
# unzip master.zip
# rm master.zip
# cd freebsd-ports-xorg-raspberrypi-master/x11-fonts/fontconfig/
# cp -rf * /usr/ports/x11-fonts/fontconfig/
# cd ../../x11/pixman/
# cp -rf * /usr/ports/x11/pixman/
(4) graphics/libGL, graphics/dri
building xorg with "WITH_NEW_XORG=yes" on ARM, you will meet error of graphics/libGL and/or graphics/dri. both issue will fix applying Olivier Cochard-Labbe's patch(ports/176703 and 176705) to graphics/libGL only.
# cd ../../graphics/libGL/
# cp -rf * /usr/ports/graphics/libGL/
(5) security/libgcrypt
security/libgcrypt had a building issue on ARM (ports/181365 by Rui Paulo). PR had been commited and this issue fixed.
4: building xorg
# cd /usr/ports/x11/xorg/
# make config-recursive
note: in configure, you do not need any video drivers. RPI video driver is provided by xf86-video-scfb.
# make install clean
5: building xf86-video-scfb
# cd /usr/ports/x11-drivers/xf86-video-scfb/
# ./configure
# make install clean
6: making xorg.conf
'Xorg -configure' is not worked on RPI, yet. and you need to make "/etc/X11/xorg.conf" by yourself. but no problem.
Aleksandr Rybalko made a nice xorg.conf setting for you. what you have to do is only copying it to your "xorg.conf".
the setting is following:
Section "Files"
EndSection
Section "Module"
Load "dbe"
Disable "dri"
Disable "dri2"
Disable "glx"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
EndSection
Section "ServerFlags"
Option "AIGLX" "false"
Option "NoAccel" "True"
Option "NoDRI" "True"
Option "DRI" "False"
Option "DRI2" "False"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/sysmouse"
EndSection
Section "Monitor"
Identifier "Monitor"
Mode "1024x600"
DotClock 25.175
HTimings 1024 1048 1148 1200
VTimings 600 610 620 700
EndMode
EndSection
Section "Device"
Identifier "Generic FB"
Driver "scfb"
Option "NoAccel" "True"
EndSection
Section "Screen"
Identifier "Screen"
Device "Generic FB"
Monitor "Monitor"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x600"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout"
Screen 0 "Screen" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
7: adding setting to rc.conf
# echo 'dbus_enable="YES"' >> /etc/rc.conf
# echo 'hald_enable="YES"' >> /etc/rc.conf
8: booting dbus and hald
# /usr/local/etc/rc.d/dbus start
# /usr/local/etc/rc.d/hald start
9: booting xorg
% startx
enjoy!