This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
3PDT breakout board with LED and CLR.
This repository contains:
- A gerber file to produce the PCB.
- A gerber file to produce the PCB with a location specified for the production number if using JLCPCB.
There is no support supplied or guaranteed for the PCB. I have built it and it works, YMMV.
- Power (9V) goes into SW.
- If you want to bypass the LED altogether, then jumper where indicated.
- If you want to bypass the CLR, then jumper it.