SSMP, aka the Stupid-Simple Messaging Protocol is an application-level protocol for 1:1 and 1:many messaging which aims to be a lightweight alternative to open messaging protocols such as XMPP or STOMP.
Key design goals:
- Text-based, for easy debugging
- Interleave request/responses and server events on a single connection
- Simple enough that a complete and efficient client or server can be written in pretty much any programming language within a few hours
- 1.0: Initial version
SSMP is designed to run atop a reliable 2-way streaming transport such as TCP.
SSMP supports both 1:1 (aka unicast) and 1:many (aka multicast) messaging.
Unicast messages can be addressed to any peer using the identifier supplied upon login.
Multicast messaging uses a publish/subscribe approach, where messages are sent to a "topic" and forwarded to every client that subscribed to the topic in question.
A limited form of broadcasting is also allowed, wherein a peer can send a message to all peers sharing at least one topic subscription.
Each message is a LF-delimited sequence of UTF-8 encoded unicode codepoints
that MUST NOT exceed 1024 bytes, LF delimiter included.
Empty messages are not allowed. In other words, a single LF delimiter MUST be
used between two messages.
Using the augmented BNF format specified in Section 2.1 of RFC 2616
message = ( request | response | event ) LF
request = "LOGIN" SP id SP id [ SP payload ]
| "CLOSE"
| "PING"
| "PONG"
| forwardable
response = code [ SP payload ]
event = "000" SP id SP ( forwardable | "PING" | "PONG" )
forwardable = "SUBSCRIBE" SP id [ SP "PRESENCE" ]
| "UNSUBSCRIBE" SP id
| "UCAST" SP id SP payload
| "MCAST" SP id SP payload
| "BCAST" SP payload
| compat
compat = verb [ SP id ] [ SP payload ]
code = 3DIGIT
verb = 1*UPALPHA
id = 1*ID
payload = 1*PAYLOAD
ID = UPALPHA | LOALPHA | DIGIT
| "." | ":" | "@" | "/" | "_" | "-" | "+" | "=" | "~"
PAYLOAD = <any 8-bit value, except US-ASCII LF>
UPALPHA = <any US-ASCII uppercase letter "A".."Z">
LOALPHA = <any US-ASCII lowercase letter "a".."z">
DIGIT = <any US-ASCII digit "0".."9">
SP = <US-ASCII SP, space (32)>
LF = <US-ASCII LF, linefeed (10)>
Response code values are borrowed from HTTP where appropriate.
200OK400Bad Request401Unauthorized404Not Found405Not Allowed501Not Implemented
The special 000 code is used to distinguish server events from request/responses,
thereby allowing events to be freely interleaved with regular responses on the same
connection.
The first client request in any connection MUST be a LOGIN.
The format of a LOGIN request is:
LOGIN <identifier> <scheme> [ <credential> ]
If the authentication is successful, the server MUST send a 200 response
with no payload.
If no request is received after a reasonable period of time, typically a few seconds, the server MUST close the connection without sending any response.
If the first request is not a LOGIN the server MUST send a 400 response
and immediately close the connection.
If the scheme value is not supported or if the authentication fails for
any other reason, the server MUST send a 401 response with with a space-
separated list of supported authentication schemes as payload and immediately
close the connection.
After a successful LOGIN request, servers MUST reject any subsequent LOGIN
request on the same connection with code 405.
The identifier supplied upon login can be used by other peers to send unicast messages, as described later in this document.
Upon successful login the server MUST close any previous connection that used the same identifier.
Servers MAY allow login with the reserved . user identifier.
Servers which allow anonymous login SHOULD allow multiple such connections simultaneously.
Anonymous connections are intended for publishers. They MAY NOT subscribe to any topic and cannot receive unicast messages but they can publish messages to existing topics.
All servers that accept connection over SSL/TLS MUST allow authentication through client certificates.
The scheme value for certificate authentication is cert.
When a connection is made with a client certificate, LOGIN MUST succeed for
any identifier matching either the Common Name or one of the Subject Alternative
Names specified in the client certificate.
To accommodate multiple connections being opened using the same certificate,
servers MAY accept identifiers consisting of a valid Common Name or Subject
Alternative Name followed by a forward slash (/) and a sequence of one or
more ID characters.
Servers MAY allow authentication through a pre-shared secret.
The scheme value for shared secret authentication is secret.
Servers MAY allow unauthenticated LOGIN.
The scheme value for open login is open.
The client SHOULD NOT include a credential field in an open login request
and the server MUST ignore its content if it is present.
Open login is subject to easy abuse and SHOULD therefore only be enabled for debugging purposes.
Servers MAY support other authentication schemes. The scheme value MUST be a
sequence of one or more ID characters.
Periodic ping messages are used to test connection liveness and prevent closure by aggressive firewalls.
Clients SHOULD send a PING request after an implementation-defined period where
no server event is received, typically about 30s.
Upon reception of a PING request, servers MUST send a PONG event using the
anonymous identifier as its provenance.
Client Server
PING ---->
<---- 000 . PONG
Clients SHOULD close the connection if no PONG event is received during an
implementation-defined period, typically 30s, after a PING request was sent.
Servers SHOULD send a PING event after an implementation-defined period where
no client request is received, typically about 30s. The provenance MUST be the
anonymous identifier.
Upon reception of a PING event, clients MUST send a PONG message.
Servers MUST NOT send any message in response to a PONG message.
Client Server
<---- 000 . PING
PONG ---->
Servers SHOULD close the connection if no PONG message is received during an
implementation-defined period, typically 30s, after a PING event was sent.
Opt in to receiving events for messages sent to a multicast topic.
SUBSCRIBE <topic> [ PRESENCE ]
Any SUBSCRIBE request from an anonymous user MUST be rejected with code 405.
If the caller was already subscribed to the given topic, the server MUST respond
with code 409.
The optional PRESENCE flag can be used to subscribe to presence notifications,
as described later in the following section.
Opt out of receiving events for messages sent to a multicast topic.
UNSUBSCRIBE <topic>
Any UNSUBSCRIBE request from an anonymous user MUST be rejected with code 405.
If the caller was not subscribed to the given topic, the server MUST respond with
code 404.
When the PRESENCE flag is provided, the caller will receive an initial batch
of SUBSCRIBE events for all current subscribers and subsequently, SUBSCRIBE
and UNSUBSCRIBE events as topic membership changes.
The server MUST ensure that presence notifications are delivered in a safe
order. Crucially, an UNSUBSCRIBE event MUST NOT be re-ordered before the
corresponding SUBSCRIBE event.
Upon successful subscription, the server MUST forward the message to every
client who specified the PRESENCE flag when subscribing to the topic.
000 <from> SUBSCRIBE <topic> [ PRESENCE ]
Upon successful unsubscription, the server MUST forward the message to every
client who specified the PRESENCE flag when subscribing to the topic.
000 <from> UNSUBSCRIBE <topic>
Message delivery is:
- in-order: two messages from the same sender to the same recipient MUST arrive in-order at the recipient
- at most once: recipients MUST NOT receive duplicate messages
- best effort with no acknowledgment: a successful response from the server indicates that the message was received by the server but not necessarily by the final recipient
Send message to a single peer.
UCAST <to> <payload>
If no peer with the requested identifier is currently connected, the server
MUST send a 404 response.
Otherwise it MUST forward the message to the given peer:
000 <from> UCAST <to> <payload>
Send message to all peers subscribed to a given topic.
MCAST <topic> <payload>
The server MUST NOT send a 404 response, even if no peer has subscribed to the given topic.
The server MUST forward the message to to every peer having subscribed to the topic, except the sender.
000 <from> MCAST <topic> <payload>
A client does not need to be subscribed to a topic to send messages to it.
Broadcast to all peers sharing at least one topic.
BCAST <payload>
Any BCAST request from an anonymous user MUST be rejected with code 405.
The server MUST send forward the message to every peer sharing at least one
topic with the sender of the BCAST request.
000 <from> BCAST <payload>
Peers that share multiple topics with the sender MUST NOT receive multiple
identical BCAST events.
A client may cleanly close a connection by sending a CLOSE request.
CLOSE
Upon receiving a CLOSE request, servers MUST reply with code 200 and
immediately close the connection.
Servers MUST send appropriate UNSUBSCRIBE events for all topics to which
the client was subscribed.
Similarly, if the server closes a connection for any reason, either mandated
by this specification or due to underlying network issues, it MUST send
appropriate UNSUBSCRIBE events.
Upon reception of a request with an unrecognized verb, servers MUST send a
501 response.
This is intended to allow client to safely detect whether servers support any new or optional requests that may be added in future versions of this specification.
Upon reception of an event with an unrecognized verb, clients MUST immediately
close the connection.
Clients and servers SHOULD secure communications by connecting over TLS, especially if a pre-shared secret is used for authentication purposes.