suprimex / gruvin9x

Automatically exported from code.google.com/p/gruvin9x

suprimex/gruvin9x Issues

Watchdog TImer reboot fails to re-start system properly
Updated 9 years ago1
Font colour is no good
Updated 9 years ago4
THR and AIL switch
Closed 9 years ago10
Low bat alarm doesn't sound when voltage is below 4.9V (first noted on frsky/stock board.)
Closed 9 years ago6
SIMU hangs when trying to format virtual EEPROM
Updated 9 years ago33
main_views.cpp telemetry views broken (trunk)
Closed 9 years ago15
Makefile header text is out of date
Closed 9 years ago2
Add 'make fuses' capability to Makefile
Closed 9 years ago1
Code not compatible with up-to-date build environment (gcc 4.6.2, avr-libc 1.8.0)
Closed 9 years ago13
Channel order and fail safes
Updated 9 years ago7
Frsky vario/altimeter reset altitude
Closed 9 years ago9
Patch for /branches/frsky/src/main_views.cpp
Closed 9 years ago10
TRIM values as inputs..
Updated 9 years ago10
Trainer SW in FUNC SWITCHES messed up
Closed 9 years ago14
Flight Phase Name last pixel column interference
Closed 9 years ago2
TX Power on ALERT: THR not idle
Closed 9 years ago3
Batt Volts calibration (ANA Screen) and BG averaging.
Closed 9 years ago4
All Switches and Channels on display
Closed 9 years ago22
source of mix is Channel with FlightPhases
Closed 9 years ago5
T-Trim switch
Closed 9 years ago8
Trunk won't boot on V4 board
Closed 9 years ago4
Patch for /trunk/firmware/src/file.cpp
Closed 9 years ago3
Batery Voltage calculatin
Closed 9 years ago6
FightPhase FadeIN/OUT
Closed 9 years ago25
Move/Copy model should not write EEPROM until user confirms the action
Closed 9 years ago14
Model move/copy should not do the move/copy until finally confirmed
Closed 9 years ago9
NoKey should NOT disable trim switch beeps
Updated 9 years ago
Order of DR/EXPO lines affect whether switch works or not
Closed 9 years ago34
DR/Expo data fails to convert/translate r1197
Closed 9 years ago12
DR/Expo bugs -- crashes and curves bad
Closed 9 years ago4
Writing to SD card of unknown format causes catastrophic crash
Updated 9 years ago2
Replace SD card board with new Audio/File Storage Subsystem
Updated 9 years ago1
RTC and SD card functions broken
Closed 9 years ago2
Curve editor bugs / nusenses
Closed 9 years ago3
Moving/Copying past 16 back to 01 in model menu corrupts data
Closed 9 years ago8
Stick mode changes not correctly handled
Updated 9 years ago4
WDT reset when trying to access model menu
Closed 9 years ago12
"Working" or "Busy..." during model load operations
Closed 9 years ago3
Have DR/EXPO channel order comply with system setting
Updated 9 years ago4
As at r1101 -- Heli Setup template does not apply correctly.
Closed 9 years ago4
EXPO/DR screen should show Flight Phase switches
Closed 9 years ago26
EDIT FLIGHT PHASE -- cursor moves when not in edit mode (Name field)
Closed 9 years ago2
v3 EEPROM EXPO/DR conversion error
Closed 9 years ago6
Mixer screen digit overlap
Closed 9 years ago3
System seems to lock momentarily every second or so
Closed 9 years ago4
Possible model list redesign? No more numbers? Low priority.
Closed 9 years ago4
V4 / Hardware PPM -- pulse polarity cannot be changed
Closed 9 years ago4
Spektrum TX module requires fixed PPM frame length
Closed 9 years ago3
Trim Sw and Trainer switches
Closed 9 years ago9
Consider ways to make deleting models more safe
Closed 9 years ago24