suarezcp87 / beeline_sbtplus

Configuration files & patches for Beeline Smart Box Turbo+ Openwrt firmware

Beeline Smart Box Turbo+

Configuration files & patches for Beeline Smart Box Turbo+ Openwrt firmware

This patches:

• add a new device profile "Beeline Smart Box Turbo+" router to Openwrt buil folder (tested on version 19.07.05, but can works early|later)
• activate UART3 on mt7621a - based devices
• activate UART3 as /dev/ttyS1 for interoperate with onboard EFR32MG12 Zigbee module
• activate HSDMA mode

How to use

For advanced users

1. Place a two files .patch and .config.sbt to your /Openwrt folder
2. Run patch $ patch -p1 < beeline_sbtpluslus_uart3_hsdma_2021-01-25.patch
3. Open configuration tool (make menuconfig)
4. Load '.config.sbt' configuration file
5. Save a .config file

For others

1. Download appropriate -factory.zip or -sysupgrade.bin firmware.

2. Check partiton table on your router patrtition start size u-boot 0x0-0x100000, SC PART_MAP 0x100000-0x100000, kernel 0x200000-0x400000, ubi 0x600000-0x7800000, factory 0x7e00000-0x100000

3. Flash firmware.

4. Reset to factory defaults.

Enjoy :)