stuartpittaway/diyBMS Issues
Temp calibration
Updated 2current
UpdatedAtmega328 conversion
UpdatedMissing R5 from BOM
Closed 1When was R5 removed?
Closed 3ESP32 diyBMS
Updated 3Am I blind, where is R11?
Closed 1Confused
Closed 2ATTiny acting weird
Closed 2documentation
Closed 2The direction of ALUM1250
Closed 9why 3.3V for the ATTiny ?
Closed 4New PCB
Closed 5ESP code conver to Arduino Uno code
Closed 26BOM updated
Updated 13DIY BMS Stencil for 3D printing
Closed 1Not compiling under Linux
Closed 1Is resistor R2 too low?
Closed 4PCB works - almost!
Closed 4