My current setup consists of a KNX system together with some NEXA/Telldus "smart" plugs and a few ZigBee devices (mostly Aqara sensors).
Because the server running HA is located in the basement, I needed to figure out a way to extend the radio signal for the Tellstick Duo and ConBee dongles. My first idea was to buy longer USB cables, but I had to drop that idea quickly since they needed to be in lengths of tens of meters. I started to google around and found two suitable software approaches: usbip and socat. I experimented with usbip and quickly got a PoC working with the ConBee device. The final setup basically consists of a Raspberry Pi located underneath the first floor staircase, running usbip as a server, exposing the two USB devices on the network. The NUC simply mounts these devices (also with usbip, but in "client mode"), and they ultimately show up as any other USB device.
I'm using Frigate to detect objects from my IP cameras (with a Google Coral USB Accelerator for high-speed ML inferencing).
- 1 x MDT AMS-0816.01
- 1 x MDT AKS-1216.02
- 1 x MDT AKD-0401.01
- 1 x MDT JAL-0410.01
- 4 x Schneider Exxact WDE002933
- 2 x Schneider Exxact WDE002935
- 2 x Schneider Exxact WDE002943
- 1 x Schneider Exxact WDE002949
- 2 x MDT BE-TA55P4.01
- 1 x MDT BE-TA55P6.01
- 1 x MDT SCN-IP000.01 (IP interface)
- 1 x MDT SCN-WS3HW.01 (Weather station)
- 1 x MDT STV-0640.01 (Power supply)
- 9 x Aqara WSDCGQ11LM (Temperature/Humidity Sensor)
- 3 x Aqara AS006UEW01 (Window/Door Sensor)
- 6 x Aqara AS007UEW01 (Motion Sensor)
- 4 x Aqara AS009UEW01 (Vibration Sensor)
- 1 x Aqara AS010UEW01 (Water Leak Sensor)
- 3 x Aqara WXKG11LM (Wireless Mini Switch)
- 1 x Innr SP 120
- 3 x IKEA TRÅDFRI
- 1 x Gledopto RGB+CCT LED Strip
- 2 x LEDVANCE Smart+ LED E14 (Tunable White)
- 1 x Sunricher SR-ZG9101SAC-HP (In-Wall Phase-Cut Dimmer)
- 3 x HiLook IPC-D140H
- 1 x Foscam C2M 00c2m
Still got some old NEXA wall plugs that works good enough to not be replaced.