stm32duino / LSM6DSO

Arduino library to support the LSM6DSO 3D accelerometer and 3D gyroscope

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

LSM6DSO

Arduino library to support the LSM6DSO 3D accelerometer and 3D gyroscope

API

This sensor uses I2C or SPI to communicate. For I2C it is then required to create a TwoWire interface before accessing to the sensors:

TwoWire dev_i2c(I2C_SDA, I2C_SCL);  
dev_i2c.begin();

For SPI it is then required to create a SPI interface before accessing to the sensors:

SPIClass dev_spi(SPI_MOSI, SPI_MISO, SPI_SCK);  
dev_spi.begin();

An instance can be created and enabled when the I2C bus is used following the procedure below:

LSM6DSOSensor AccGyr(&dev_i2c);
AccGyr.begin();
AccGyr.Enable_X();  
AccGyr.Enable_G();

An instance can be created and enabled when the SPI bus is used following the procedure below:

LSM6DSOSensor AccGyr(&dev_spi, CS_PIN);
AccGyr.begin();	
AccGyr.Enable_X();  
AccGyr.Enable_G();

The access to the sensor values is done as explained below:

Read accelerometer and gyroscope.

int32_t accelerometer[3];
int32_t gyroscope[3];
AccGyr.Get_X_Axes(accelerometer);  
AccGyr.Get_G_Axes(gyroscope);

Examples

There are several examples with the LSM6DSO library.

  • LSM6DSO_HelloWorld: This application provides a simple example of usage of the LSM6DSO IMU 6-axis. It shows how to display on a hyperterminal the values of the sensor.
  • LSM6DSO_6DOrientation: This application shows how to use the LSM6DSO accelerometer to find out the 6D orientation and display data on a hyperterminal.
  • LSM6DSO_FreeFallDetection: This application shows how to detect the free fall event using the LSM6DSO accelerometer.
  • LSM6DSO_Pedometer: This application shows how to use the LSM6DSO accelerometer to count steps.
  • LSM6DSO_SingleTap: This application shows how to detect the single tap event using the LSM6DSO accelerometer.
  • LSM6DSO_DoubleTap: This application shows how to detect the double tap event using the LSM6DSO accelerometer.
  • LSM6DSO_TiltDetection: This application shows how to detect the tilt event using the LSM6DSO accelerometer.
  • LSM6DSO_WakeUpDetection: This application shows how to detect the wake-up event using the LSM6DSO accelerometer.

Documentation

You can find the source files at
https://github.com/stm32duino/LSM6DSO

The LSM6DSO datasheet is available at
https://www.st.com/content/st_com/en/products/mems-and-sensors/inemo-inertial-modules/lsm6dso.html

About

Arduino library to support the LSM6DSO 3D accelerometer and 3D gyroscope


Languages

Language:C 82.8%Language:C++ 17.2%