tinycore-redpill
This is a testing version. Do not use unless you are certain you have no data to lose.
Please note that minimum recommended memory size for configuring the loader is 2GB
Instructions
A normal build process would start with :
1. Image burn
-
a. For physical gunzip and burn img file to usb stick
-
b. For virtual gunzip and use the provided vmdk file
2. Boot tinycore
3. ssh to your booted loader or just open the desktop terminal
global_config.json
, custom_config.json
, user_config.json
)
4. Bring over your json files (5. Check the contents of user_config.json, if satisfied keep or else run:
-
a. Perform a rploader update by running
./rploader.sh update
-
b. Perform a fullupdate to update all local files of your image by running
./rploader.sh fullupgrade
-
c. Change you serial and mac address by running
./rploader.sh serialgen DS3615xs
, if you want to use WoL you can use realmac option here e.g../rploader.sh serialgen DS3515xs realmac
-
d. Update user_config.json with your VID:PID of your usb stick by running
./rploader.sh identifyusb
-
e. Update user_config.json with your SataPortMap and DiskIdxMap by running
./rploader.sh satamap
-
f. Backup your changes to local loader disk by running
./rploader.sh backup