== Overview == This is an application for web2py and is used to build preconfigured firmware images for openwrt and is a rewrite of the "Freifunk OpenWrt Imagebuilder" [1]. Meshkit is mainly intended to be used for creating firmware images for wireless communities like Freifunk that are "ready-to-mesh" directly after they have been flashed on a router. But with the "noconf" config option it is also possible to use it just to build OpenWrt images with a custom package selection and uploaded files included. == A few words about how image configuration works == Meshkit itself just writes a uci config file and stores it in /etc/config/meshkwizard in the resulting firmware image. The actual configuration is done by meshwizard [2], which uses community profiles [3] and the settings from meshkit to configure the device at first boot after the device has been flashed. == INSTALLATION == See the INSTALL file for installing and configuring meshkit. == DEVELOPMENT == Watch Meshkit development at: https://github.com/freifunk/meshkit == CONFIG == Different Communities can have different configs. this can be edited via http://luci.subsignal.org/trac/browser/luci/trunk/contrib/package/community-profiles/files/etc/config and special files here https://trac.augsburg.freifunk.net/browser/kamikaze/contrib/imagebuilder/trunk/profiles == BUGTRACKER == Report bugs, feature requests etc. at: https://github.com/freifunk/meshkit/issues == LINKS == [1] http://trac.augsburg.freifunk.net/browser/kamikaze/contrib/imagebuilder [2] http://luci.subsignal.org/trac/browser/luci/trunk/contrib/package/meshwizard [3] http://luci.subsignal.org/trac/browser/luci/trunk/contrib/package/community-profiles