stanleyhuangyc / Freematics

Official source code repository for Freematics

https://freematics.com

stanleyhuangyc/Freematics Issues

Telelogger Setup Issue - Config file fault mishandling
Updated 3 months ago10
pidmap always set to 0xff
Closed 4 months ago3
A bug and a meaningless(?) calculation
Closed 4 months ago1
Freematics One+ B - Unable to resolve GPS data using newer library
Updated 4 months ago
FR: offer the setup of APN username and APN password via configfile
Updated 7 months ago
Remove Filter from sniff mode
Updated 8 months ago1
NO GPS on both Devices
Updated 9 months ago
Unable to compile datalogger/telelogger: undefined reference to handlerControl
Updated 9 months ago
Freematics ONE+ not reporting additional PIDS
Closed 9 months ago2
A fatal error occurred: Failed to connect to ESP32: Wrong boot mode detected (0x13)! The chip needs to be in download mode.
Closed 9 months ago2
Corrupt GPS data after upgrading to "Improved GNSS module initialization" commit
Closed 9 months ago9
could you provide schematics file for Esprit-c3?
Closed 10 months ago2
GNSS data is not sent to server (Freematics ONE+)
Closed 10 months ago1
the SIM800L resulted continue rebooting
Closed a year ago1
EV support for Freematic libraries
Updated a year ago2
Use SD card as buffer
Closed a year ago1
SIM7600E-H No Service, Online
Updated a year ago5
Info: how I managed to read battery PIDs from my EV
Updated a year ago1
Firmware V5 Telelogger posts only zeroes to traccar
Closed a year ago3
firmware_v5/datalogger corrupted after enabling BLE
Closed a year ago1
Newer telestore code taking a long time to enumerate SD card with existing DATA directory with 900+ saved files
Updated a year ago
sys.begin() error: UART Driver Already Installed
Updated a year ago1
schematics diagram / known quirks for the One+
Updated a year ago5
No SD Card - There is no valid FAT volume
Updated a year ago3
firmware_v5/telelogger Problem bulding
Updated a year ago2
Lawicel and Freematics One+ Compatibility
Updated 2 years ago
Teleogger goes into sleep/stanby prematurely
Closed 2 years ago3
No voltage reading when car is ping back
Updated 2 years ago
Not found - hub/api/channels/Z13Z5N06
Updated 2 years ago
teleserver: reduces teleloger-timestamp(ticks) from 64bit-->32bit and overflows every 2 weeks
Updated 2 years ago
ENABLE_OLED 1 errors
Updated 2 years ago1
Rewriting git-history when commits are broken
Updated 2 years ago
Standby issue, device not waking (i think)
Updated 2 years ago4
Write log messages to SD card
Updated 2 years ago1
Improve freematics Builder UI
Updated 2 years ago
Non-effective critical sections on SPI send/receive methods
Updated 2 years ago
Network Error when NET_DEVICE NET_SIM7600 and GNSS GNSS_CELLULAR
Updated 2 years ago1
Compiling and uploading doesn't work (version 1.2.2, 1.2.1, 1.1.3 @ Win10 & Win11)
Updated 2 years ago
Base MAC address from BLK0 of EFUSE CRC error
Updated 2 years ago1
How to prohibit FREEMATICS sending zero locations (0, 0) to the server?
Updated 3 years ago1
[v5/telelogger] will not send Internal GPS position to server (gd->ts is 0)
Closed 3 years ago3
protocol J1939 not suppport by chip ELM327 v 1.5 /STM32F
Closed 3 years ago1
Support for HTTP AUTH v5 telelogger
Updated 3 years ago
GNSS_CELLULAR does not provide any GPS data
Updated 3 years ago2
Fails to reconnect/re-initialise OBD connection after standby
Closed 3 years ago2
'isValidPID' causing problems accessing available/valid PIDs on vehicle
Updated 3 years ago19
Closing car door wakes from standby
Updated 3 years ago9
Trips aren't showing in the hub "Trip Browser" with GNSS_NONE
Updated 3 years ago1
Guru Meditation Error: Core 1 panic'ed - boot loop caused by obd.getvoltage or if (sys.devType > 12)??
Updated 3 years ago
telelogger v5 compile error
Closed 3 years ago1