ssfrr / libmanta

A library and set of applications to interface with the Snyderphonics Manta

ssfrr/libmanta Issues

manta object crashes Max on Big Sur or M1
Updated 3 years ago2
MantaOSC - segmentation fault
Updated 6 years ago1
MantaOSC on Linux does not find attached manta
Closed 10 years ago10
"manta.pd_linux: can't load library" in PureData
Closed 6 years ago6
Need to update Flext
Updated 7 years ago
setup more automated build system
Updated 7 years ago
Build/release 64-bit PD and Max externals
Updated 7 years ago
rename command-line MantaOSC and MantaMIDI
Updated 7 years ago
Release windows builds of command-line tools
Updated 7 years ago
flext object should support LED frame message
Updated 8 years ago1
Flext git submodules should use https path
Closed 8 years ago1
MantaOSC - version of Manta reported?
Updated 9 years ago5
max value of slider is 65536, while incoming value only seems to be 12-bit
Closed 9 years ago3
Double-Connect and Double-Disconnect should be errors
Updated 10 years ago
MantaCommunicationError should disconnect
Updated 10 years ago
MantaMIDI issue - crash when reconnecting
Updated 12 years ago1
MantaMIDI issue - missed note ons
Closed 12 years ago2
MantaMIDI feature request - function buttons should have alternate functions
Updated 12 years ago
MantaMIDI issue - velocity should start off
Updated 12 years ago
making maximum led limit in underlying API
Updated 12 years ago
list of attached mantas API call
Updated 12 years ago
manta needs to clear red LEDs when ledcontrol is set to local
Closed 12 years ago1
flext object should support "onebased N" message
Closed 13 years ago
fix manta.poly object so first inlet is "anything"
Closed 13 years ago
object should check if serial number is greater than or equal to 70 (is it 2nd ed?) and if so, turn on amber leds when a red led command is received
Closed 13 years ago
flext object should have 1 inlet instead of 2
Closed 13 years ago
maybe rename the object manta2 or mantabeta or mantanew to avoid confusion during rollout?
Closed 13 years ago1
manta object should enable opening by serial #
Closed 13 years ago
store ledcontrol messages until manta is found
Closed 13 years ago4
flext object should support the "reset" message. Just sends the "reset" bit in the API
Closed 13 years ago3
centroid outputs should send -1 when not touched (like the original manta object)
Closed 13 years ago
flext object should support the "raw" message. raw 1 turns on raw mode, raw 0 turns it off
Closed 13 years ago
flext object should support the "turbo" message. "turbo 1" turns it on, "turbo 0" turns it off
Closed 13 years ago
another manta object open in another window steals control of the manta over usb.
Closed 13 years ago1
ledsoff message should turn off all LEDs
Closed 13 years ago
led setting messages should accept lists of pads or buttons
Closed 13 years ago
need to figure out how to make an installer for the kext
Closed 13 years ago1
manta.maximum needs to understand "maxskip" message.
Closed 13 years ago
only print looking for manta once
Closed 13 years ago
"reset" message should send the reset bit to the manta
Closed 13 years ago
centroid and maximum need to load the manta library
Closed 13 years ago1
needs buttoncontrol mode, where hex leds are internally controlled, but buttons are controlled by the computer
Closed 13 years ago
off, amber and red should also work with 0 1 2
Closed 13 years ago
Velocity detection should be switchable
Updated 13 years ago
flext object slider message should take single number
Closed 13 years ago