CoreXY 3D Printer with a Belt to automatically eject part. eveything fit inside the frame so that it's easy to enclose it.
-> All inside the frame. no part sticking out
-> Belt for automatic part ejection
-> CoreXY
-> Reuse Most part of the FLsun Cube 3D Printer
-> Dual extruder
Stock part : (most of it is in the FLsun cube kit)
| Name | QTY | |
|---|---|---|
| M3 Screw | A LOT | |
| M4 Screw | A LOT | |
| Slider T-Nut for 2020 - M4 | 106 | |
| Slider T-Nut for 2020 - M4 | 106 | |
| 2020 cast corner bracket | 22 | |
| SK8 | 12 | |
| 20X20 - T-slot - Aluminium Profile | 8 | |
| LM8UU 8mm Linear Bearing | 8 | |
| GT2 Timing Idler Pulley, Configurable, 20T W6 B3 With T | 8 | |
| E3D Stepper Motor | 6 | |
| 20X20 - T-slot - Aluminium Profile | 4 | |
| VerticalRod | 4 | |
| VerticalBearing | 4 | |
| SS-5GL | 3 | |
| E3D-V5 | 2 | |
| SmallRod | 2 | |
| rod | 2 | |
| 1.75mm-filament-spool | 2 | |
| Arduino relay | 2 | |
| Linear_rod_nut_8mm | 2 | |
| Linear_rod_400mm | 2 | |
| PlateHeatbed | 2 | |
| LBracket | 2 | |
| MK8 EXTRUDER LEFT | 2 | |
| PulleyHolderXY | 2 | |
| GT2 Timing Pulley, Configurable, 16T W6 B5 | 2 | |
| LED INFRARED CAMERA PI | 2 | |
| proximity | 1 | |
| Raspberry Pi 4 Model B | 1 | |
| mks sgen l v2.0 | 1 | |
| S-120-12 PSU | 1 | |
| dc-dc SZBK07 | 1 | |
| Fan_Assembly | 1 | |
| SN04-N | 1 | |
| heatbed | 1 | |
| DCMotor | 1 | |
| RouleauFriction | 1 | |
| RouleauIdler | 1 | |
| DCMotorHolder | 1 | |
| power | 1 | |
| Cam V2.1 v1 | 1 |
custom part :
| Name | QTY | |
|---|---|---|
| RouleauMount | 3 | |
| GantryHolder | 2 | |
| SpoolHolder | 2 | |
| RelayBracket | 2 | |
| BracketControlPannel | 2 | |
| FanSpace | 2 | |
| StepperXYHolder | 2 | |
| StepperZHolder | 2 | |
| PSUBracket | 1 | |
| PSUBracket | 1 | |
| CameraBracket | 1 | |
| EndSwitchBracket | 1 | |
| RollerMotorCoupler | 1 | |
| ExtruderLock | 1 | |
| HotendMountCarriage | 1 | |
| BackPlate | 1 |
Price should range in the 250-350 $ depending of the supplier
TODO ... (i use two custom tube for the belt that where laying around. you will need to make youre own using 20 mm alu tube and a few custom part (share the part if you do))
-> maybe you ?
-> me :3
-> every person on grabcad who made each subcompents model like the stepper, raspberry pi, relay, extrusion, etc