srsran / srsRAN_4G

Open source SDR 4G software suite from Software Radio Systems (SRS) https://docs.srsran.com/projects/4g

https://www.srsran.com

srsran/srsRAN_4G Issues

UE cannot find the LTE Network
Closed a month ago2
Issues compiling srsRAN and srsGUI on Ubuntu 24.04
Updated 25 days ago3
Could not set RX rate to 11.520 MHz. Actual rate is 11.703 MHz
Updated a month ago1
various array subscript bounds warnings on Fedora 39
Updated a month ago
Raspberry Pi5 Build Failure w/ LimeSDR Mini
Updated a month ago3
Analyzing Cell Search Results
Closed a month ago
ARE CELL_SEARCH RESULTS CORRECT ?????????
Closed a month ago
SIB Messages & Cell Search
Updated a month ago
If UE access increases, memory cannot be applied for
Updated a month ago
UE（phone）cannot connect to the Internet after using srsepc_if_masq.sh
Updated a month ago
TX while waiting for EOB, timed out...
Updated a month ago
Amarisoft how to create dedicated bearer
Updated 2 months ago
AMF report ERROR: HTTP response error with code [400]
Closed 2 months ago10
volte_ue
Updated 2 months ago
Non cleartext IEs is included
Updated 2 months ago1
srsran_4G dashboard
Updated 2 months ago
Adding support for LNB LO frequency
Updated 3 months ago
srsRAN 4G is not able to completely install after Installation of UHD 3.15 for USRP X310 and failed at 85% after execution of make command on linux ubuntu
Updated 3 months ago2
configuration when ue and gnb installed in separate machines
Updated 3 months ago3
SRSEPC crashes on Ubuntu 22.04
Updated 3 months ago
When I set srate to a value in ue.conf file in srsran 4g I faced with a strange errors
Closed 3 months ago2
srsRAN gnb cannot find USRP B210
Closed 3 months ago4
srsRAN Project 5G unable to detect USRP B205 Mini and not generating expected console output
Updated 3 months ago
Couldn't stop after 5s. Forcing exit: Why UE in srsran4g can not stop after some time that i run.....it will be killed (UE process)?
Updated 3 months ago
RuntimeError: Reference Clock PLL failed to lock to external source.
Updated 3 months ago
When I modify the channel_bandwidth_MHz and srate of the eNB, I can still access the core network, but the UE cannot. What parameters should I modify in the ue.conf?
Updated 3 months ago
Error running make test
Updated 3 months ago7
Support for TM3/TM4 in srsRAN_4G
Updated 3 months ago
Error- buffer pool is empty
Updated 3 months ago
enb Tx port not specified in 5G SA End-to-End
Updated 3 months ago2
IS srsenb run on IPv6?
Updated 3 months ago
decoding using npdsch_ue failed
Closed 3 months ago3
NB-IoT setup using ZMQ error
Closed 4 months ago2
Reduce use of memory with 6 PRBs
Updated 4 months ago
[ uhd_init failed, freeing... / Failed to open a RF frontend device ] error on nb-iot signalling
Closed 4 months ago1
Fails to build on Debian 13 (trixie/testing)
Updated 4 months ago1
SRS
Updated 4 months ago
srsEPC is not working
Closed 4 months ago
eNB x2 Interface
Closed 4 months ago1
NB-IoT Signalling on Local Host is possible ?
Closed 4 months ago1
Unstable network with USRP B200
Updated 4 months ago4
srsran config for support volte
Updated 4 months ago1
connection between srsue and srsenb only works the first time
Updated 5 months ago1
Help requested for UE bandwidth being throttled
Updated 5 months ago
PC access to X310 srsRAN_4G base station via 4G module (Quectel)
Updated 5 months ago
Ipref high throughput
Closed 5 months ago1
nr_sa_cell_search_test not working on mode 2
Closed 5 months ago1
Power off eNB or gNB
Closed 5 months ago1
New E-UTRA operating bands
Updated 5 months ago
Cannot modify the code in main.cc
Closed 5 months ago1