USBMap

Python script for mapping USB ports in macOS and creating a custom injector kext.

Features

No dependency on USBInjectAll
Can map XHCI (chipset, third party, and AMD), EHCI, OHCI, and UHCI ports
Can map USB 2 HUBs (requires the HUB's parent port uses type 255)
Matches based on class name, not port or controller name
Allows setting nicknames to the last-seen populated ports in discovery
Aggregates connected devices via session id instead of the broken port addressing
Can use best-guess approaches to generate ACPI to rename controllers or reset RHUB devices as needed

Installation

With Git

Run the following one line at a time in Terminal:

git clone https://github.com/corpnewt/USBMap
cd USBMap
chmod +x USBMap.command

Then run with either ./USBMap.command or by double-clicking USBMap.command

Without Git

You can get the latest zip of this repo here. Then run by double-clicking USBMap.command

Quick Start

Before You Begin

Make sure you're not using any other mapping attempts (USBInjectAll.kext, USBToolBox.kext, USBPorts.kext, another USBMap.kext, etc) - they can interfere with this process
It can be helpful to run R. Reset All Detected Ports from USBMap's main menu to clear out any prior mapping information and start fresh

General Mapping Process

Make sure you've run D. Discover Ports at least once from USBMap's main menu so it knows what USB controllers you have
Choose K. Create USBMapDummy.kext via USBMap's main menu
Add the USBMapDummy.kext dummy injector to your EFI/OC/Kexts folder and config.plist -> Kernel -> Add
Reboot your machine to apply the dummy map which gives us "scratch paper" to work with
Go into USBMap's D. Discover Ports and plug a USB 2 and USB 3 device into every port - letting the script refresh between each plug

◦ It is normal that not all port personalities will have devices populate under them at this step as macOS can only see the first 15 per controller here!

◦ You can verify the dummy map is applied if all ports use a UKxx naming scheme (eg. UK01, UK02, etc)
Use USBMapInjectorEdit.command with the USBMapDummy.kext from your EFI to toggle off all non-essential, seen port personalities

◦ Disable any of the first 15 port personalities that are not used for a keyboard or mouse - EVERYTHING ELSE in the first 15 can be disabled

◦ Disabling these is ONLY TEMPORARY and done for the sake of mapping - you can still choose which to include in the final map

◦ You will need to go through each IOKitPersonality that USBMapInjectorEdit.command lists for this
Reboot your machine to apply the updated dummy map
Go into USBMap's D. Discover Ports and plug a USB 2 and USB 3 device into every port - letting the script refresh between each plug

◦ As some port personalities were disabled in step 6, it is normal that not plugged in USB devices will populate under a port personality at this step!
Go into the P. Edit & Create USBMap.kext menu and change the types to match the physical port types (i.e. the USB 2 port personality of a USB 3 Type-A port will still be type 3) and enable which port personalities (up to 15) you want to keep
Build the final USBMap.kext and replace the dummy injector in your EFI/OC/Kexts folder and config.plist -> Kernel -> Add

The dummy injector + USBMapInjectorEdit steps are to allow you to map using a "sliding window" of sorts. Since macOS can only see 15 port personalities per controller at one time, you need to map what's visible, then disable some to make room for the next sweep - and map again

FAQ

Intel Bluetooth Doesn't Show In Discovery
- Due to the way Intel Bluetooth populates, it does not show in ioreg the same way other USB devices do. You can still find its address in System Information -> USB, then clicking on the bt device and taking note of its Location ID
- This should be worked around as of this commit which merges info from system_profiler with ioreg to more completely map.

sqrdevl / USBMap