HP-Z840-Hackintosh-Opencore
Opencore configuration for Catalina 10.15.7 (Based on opencore 0.7.7, tested 0.7.8 works)
Here I am sharing the opencore configuration files of HP Z840 Hackintosh with Catalina. It should be works for you if you have a similar hardware configuration, or at least allow you to finish OS installation and have a start point from there.
Hardware
- Intel E5 2650 V3 x2
- Nvidia Quadro K4200 (Metal supported)
- SATA SSD through PCIe adaptor
- No NVMe SSD, No Wifi/Bluetooth card
- On board Ethernet: Intel I210 GBE
- On board audio: ALC 221, layout 11
What is working
- Graphic card is natively supported
- Audio is natively supported with layout 11
- Ethernet is natively supported
- DRM (Web media hardware acceleration)
- All USB ports work correctly through USB mapping (USBmap.kext)
- GeekBench score: signle core 717 multi-core 10880 Computation 4750
What is not working
- SAS controller with RAID array not recognized
- Wake up from sleeping causes a reboot since RTSMemFix has not been done
- Mac fan control could not read any fan speed data thus there is no way to control fan speed.
USB Map for HP Z840
- Front USB3.0 Port 1-4 (Up to down)
- Port 1: HS13 SSP4
- Port 2: HS10 SSP4
- Port 3: HS09 SSP4
- Port 4: HS14 SSP4
- Rear USB3.0 Port 1-4 (Left to right)
- Port 1: HS03 SSP6
- Port 2: HS04 SSP5
- Port 3: HS06 SSP2
- Port 4: HS05 SSP1
- Rear USB2.0 Port 1-2
- Port 1: HS11
- Port 2: HS12
** No EHC1/EHC2/XHCI rename was comitted even it as suggested by the guide. Ports do not work properly after renaming. ** Both USBmap Tool and Hackintool did not work properly on the target machine for unknown reason. My mapping was hand picked through IORegistryExplorer on a existing map file for X99.
Credit
- Apple
- Opencore Team