`wl-gammarelay-rs`

Like wl-gammarelay, but written in rust, runs on a single thread, has three times less SLOC and uses DBus (for simplicity).

Dbus interface

$ busctl --user introspect rs.wl-gammarelay / rs.wl.gammarelay
NAME               TYPE      SIGNATURE RESULT/VALUE FLAGS
.ToggleInverted    method    -         -            -
.UpdateBrightness  method    d         -            -
.UpdateGamma       method    d         -            -
.UpdateTemperature method    n         -            -
.Brightness        property  d         1            emits-change writable
.Gamma             property  d         1            emits-change writable
.Inverted          property  b         false        emits-change writable
.Temperature       property  q         6500         emits-change writable

Installation

From Source

cargo install wl-gammarelay-rs --locked

Status bar integration

i3status-rust

i3status-rust hueshift block has the builtin support for this backend since 0.21.6.

Waybar

    "custom/wl-gammarelay-temperature": {
        "format": "{} ",
        "exec": "wl-gammarelay-rs watch {t}",
        "on-scroll-up": "busctl --user -- call rs.wl-gammarelay / rs.wl.gammarelay UpdateTemperature n +100",
        "on-scroll-down": "busctl --user -- call rs.wl-gammarelay / rs.wl.gammarelay UpdateTemperature n -100"
    },
    "custom/wl-gammarelay-brightness": {
        "format": "{}% ",
        "exec": "wl-gammarelay-rs watch {bp}",
        "on-scroll-up": "busctl --user -- call rs.wl-gammarelay / rs.wl.gammarelay UpdateBrightness d +0.02",
        "on-scroll-down": "busctl --user -- call rs.wl-gammarelay / rs.wl.gammarelay UpdateBrightness d -0.02"
    }
    "custom/wl-gammarelay-gamma": {
        "format": "{}% γ",
        "exec": "wl-gammarelay-rs watch {g}",
        "on-scroll-up": "busctl --user -- call rs.wl-gammarelay / rs.wl.gammarelay UpdateGamma d +0.02",
        "on-scroll-down": "busctl --user -- call rs.wl-gammarelay / rs.wl.gammarelay UpdateGamma d -0.02"
    }

Watch for changes

You can run wl-gammarelay-rs watch <format> to watch for changes. Each time some property changes, a new line will be printed based on string. {t} expands into temperature, {b} into brightness (0 to 1) and {bp} expands into brightness in percents (0 to 100).

For example, if you want to monitor both temperature and brightness (in percents), you can run

$ wl-gammarelay-rs watch "{t}K {bp}%"
4000K 90%
4500K 90%
5000K 90%
5000K 100%
5000K 80%
5000K 100%
...

Example usage in scripts

# Set the temperature to `5000`
busctl --user set-property rs.wl-gammarelay / rs.wl.gammarelay Temperature q 5000

# Increase the temperature by `100`:
busctl --user call rs.wl-gammarelay / rs.wl.gammarelay UpdateTemperature n 100

# Decrease the temperature by `100`:
busctl --user -- call rs.wl-gammarelay / rs.wl.gammarelay UpdateTemperature n -100

# Invert colors
busctl --user set-property rs.wl-gammarelay / rs.wl.gammarelay Inverted b true

# Toggle inverted colors
busctl --user call rs.wl-gammarelay / rs.wl.gammarelay ToggleInverted

# Set the brightness to `100%`:
busctl --user set-property rs.wl-gammarelay / rs.wl.gammarelay Brightness d 1

# Increase the brightness by `10%`:
busctl --user call rs.wl-gammarelay / rs.wl.gammarelay UpdateBrightness d 0.1

# Decrease the brightness by `10%`:
busctl --user -- call rs.wl-gammarelay / rs.wl.gammarelay UpdateBrightness d -0.1

# Set display gamma to `1.0`:
busctl --user set-property rs.wl-gammarelay / rs.wl.gammarelay Gamma d 1

# Increase gamma by `0.1`:
busctl --user call rs.wl-gammarelay / rs.wl.gammarelay UpdateGamma d 0.1

# Decrease gamma by `0.1`:
busctl --user -- call rs.wl-gammarelay / rs.wl.gammarelay UpdateGamma d -0.1

spikespaz / wl-gammarelay-rs