sparkfun / SparkFun_Thing_Plus_ESP32-S3

A SparkFun Thing Plus development board for the ESP32-S3.

Home Page:https://docs.sparkfun.com/SparkFun_Thing_Plus_ESP32-S3/

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

SparkFun Thing Plus - ESP32-S3

SparkFun Thing Plus - ESP32-S3

SparkFun Thing Plus - ESP32-S3) (WRL-24408)

The SparkFun Thing Plus - ESP32-S3 brings a powerful and versatile IoT development platform to the Thing Plus product line. It features the ESP32 WROOM-S3 MINI wireless module from espressif. The ESP32 WROOM-S3 is built around an Xtensa® 32-bit LX7 processor with massive processing power that operates at up to 240 MHz. It supports both 2.4 GHz WiFi and Bluetooth® 5 (LE) with a built-in PCB antenna. This version of the ESP32-S3 has 4MB Flash memory and 2MB of dynamic/PSRAM and the board also has with a µSD card slot for those who need more storage space.

The module has a large set of peripherals including UART, I2C, SPI, LCD control, SDIO host, TWAI® controller (compatible with ISO 11898-1, i.e., CAN Specification 2.), and more. The module allows for customizing which GPIO pins these peripherals operate on though some are limited to specific pins. The ESP32-S3 can run two USB ports simultaneously and can even act as a USB host host device.

The Thing Plus footprint breaks out all of the ESP32-C6's 23 GPIO pins to a pair 0.1"-spaced plated through hole (PTH) headers. The board also has a USB-C connector for primary power and programming, 2-pin JST connector for a LiPo battery (not included), a microSD card slot for expanded storage, and a Qwiic connector to integrate it into SparkFun's Qwiic ecosystem. It also includes a charging circuit and fuel gauge for charging and monitoring an attached LiPo battery.

Repository Contents

  • /Documents - Datasheets, additional product information
  • /Hardware - Eagle design files (.brd, .sch)
  • /Firmware - Example sketches demonstrating extra peripherals
  • /docs - Documentation files for the Thing Plus ESP32-S3 Hookup Guide

Documentation

Product Versions

License Information

This product is open source!

Please review the LICENSE.md file for license information.

If you have any questions or concerns on licensing, please contact technical support on our SparkFun forums.

Distributed as-is; no warranty is given.

  • Your friends at SparkFun.

About

A SparkFun Thing Plus development board for the ESP32-S3.

https://docs.sparkfun.com/SparkFun_Thing_Plus_ESP32-S3/

License:Other


Languages

Language:C++ 66.6%Language:HTML 33.4%