sparkfun / RedBoard

The RedBoard is SparkFun's take on the Arduino Uno. It combines the simplicity of the Uno's Optiboot bootloader (which is used in the Pro series), with the stability of the FTDI and a mini-B USB connector.

SparkFun RedBoard

SparkFun RedBoard (DEV-13975)

The RedBoard combines the simplicity of the UNO's Optiboot bootloader (which is used in the Pro series), the stability of the FTDI (which we all missed after the Duemilanove was discontinued) and the R3 shield compatibility of the latest Arduino UNO R3.

The RedBoard can be programmed over a USB Mini-B cable using the Arduino IDE: Just plug in the board, select "Arduino UNO" from the board menu and you're ready to upload code.

Repository Contents

• /Documentation - Data sheets, additional product information
• /Hardware - Eagle design files (.brd, .sch)
• /Production - Production panel files (.brd)

Documentation

• Hookup Guide - Basic hookup guide for the Redboard.
• SparkFun Fritzing repo - Fritzing diagrams for SparkFun products.
• SparkFun 3D Model repo - 3D models of SparkFun products.

License Information

This product is open source!

Please review the LICENSE.md file for license information.

If you have any questions or concerns on licensing, please contact [e-mail].

Distributed as-is; no warranty is given.

• Your friends at SparkFun.