Integrate a ALPHAESS System to Home Assistant

Introduction

Since March 2023 we have at home a PV-System from AlphaESS.
Since years I'm using Home Assistant for my smarthome and tracking of all my entities in my home.
So the idea was to integrate the AlphaESS system to HomeAssistant.
The official API was not enough, the other solutions are interesting, but my Software-Developer-Heart says:
"There is a MODBUS TCP interface, this must be usable".
From now on, I tried to integrate the system with modbus.
And it is working :)

Compatibilty

✅ Modbus-TCP connection
✅ AlphaESS Smile Hi10 with 7,8kWh battery

Features

✅ Connection to the Inverter via Modbus TCP
✅ Setup of sensor entities inside of Home Assistant
✅ Setup of a automation and the helpers for setting the "Max Feed to Grid - Rate" (How many energy is given to the grid)
✅ Setup of template-sensor to provide the values to the energy dashboard
✅ Open for modifications, no integration or other complicated stuff. Simply YAML-file!
✅ No additional integrations or AddOns needed

Prerequisites

Home Assistant v2023.1 or greater (read Release log for details)
compatible AlphaESS-System with Modbus-TCP interface --> See instructions of your System

Installation

Download the YAML-file
Copy integration_alpha_ess.yaml into the folder which is used for packages inside of you HomeAssistant-Enviroment (e.g. folder "packages", is no packages already included in your configuration.yaml create a folder with the name "packages" in you config-folder)
Include this folder inside of your configuration.yaml with following lines
```
homeassistant:
  packages: !include_dir_named packages
```
NOTE: "packages" is the name of the folder you created or already using!

Setup the following values in your secrets.yaml

alphaess_modbus_host_ip: 192.168.178.104 #TODO: Set ip adress of Alpha Ess Storage system
alphaess_modbus_host_port: 502 #Set port of Alpha Ess system - default: 502
alphaess_modbus_slaveId: 85 #Set slaveId of Alpha Ess system - default: 85

Check your configuration under the developer-tools
Perform a restart of your HomeAssistant

Usage

You will find your entities in the overview
For description of the entities, check the file integration_alpha_ess.yaml, the comments should be the explanation

Links

Description of ModbusTCP from AlphaESS:
https://www.alpha-ess.de/images/downloads/handbuecher/AlphaESS-Handbuch_SMILE_ModBus_RTU_TCP_V21.pdf (german)
List of Modbus-Registers:
https://www.alpha-ess.de/images/downloads/handbuecher/AlphaESS_Register_Parameter_List.pdf (german)

WARNINGS

Everything what is provided here is without a guarantee!
No support is promised by my side, i will help you, if i can!
Please be patient with writing registers, it can destroy your system!
Note, that only the Smile-Hi10-System is tested!
When there is a damage on your system, or you are loosing your guarantee, this is your problem. You are using this helper on your own risk!

About

This repository provides some .yaml files for home assistant.