smoonlee / pimodules-ups

💽 Organized firmware for PiModule's UPS PICO HV3.0B+

PiModules(R) Product Support Software and Related Files

This repository contains software and other files supporting PiModules(R) UPS PIco HV3.0A.

Setup Steps

1. Enable i2c, setup pi user password, use proper timezone & wifi locale via sudo raspi-config
2. SSH into your raspberry pi with UPS pico installed.
3. Run (cd ./shell_scripts/ && ./setup_dependencies.sh) to update RPI os, install prerequisite software, etc
4. Run (cd ./shell_scripts/ && ./setup_pico.sh) to config RPI serial port, i2c on system, hardware RTC, etc
5. Run (cd ./shell_scripts/ && ./firmware_update_pre.sh) to prep system for firmware update
6. Run (cd ./shell_scripts/ && ./firmware_update_main.sh) to update firmware
7. Run (cd ./shell_scripts/ && ./firmware_update_post.sh) to revert system

Extra Scripts

• run (cd ./pico_status/ && sudo python ./pico_status.py) - Script to show you some statistics pulled from your UPS PIco HV3.0A.
• run (cd ./temp_fan/ && sudo python ./pico_HV3.0_temp_fan_v1.0.py) - Script to automatically change the fan speed based on the temperature of the TO92 sensor.

Documentation

• Please visit manual in ./doc to find troubleshooting steps