simonratner / protocol

An ASCII Header Generator for Network Protocols

Home Page:http://www.luismg.com/protocol/

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

################################################################################
#                    ____            _                  _                      #
#                   |  _ \ _ __ ___ | |_ ___   ___ ___ | |                     #
#                   | |_) | '__/ _ \| __/ _ \ / __/ _ \| |                     #
#                   |  __/| | | (_) | || (_) | (_| (_) | |                     #
#                   |_|   |_|  \___/ \__\___/ \___\___/|_|                     #
#                                                                              #
#           == A Simple ASCII Header Generator for Network Protocols ==        #
#                                                                              #
################################################################################
#                                                                              #
#  Written by:                                                                 #
#                                                                              #
#     Luis MartinGarcia.                                                       #
#       -> E-Mail: luis.mgarc@gmail.com                                        #
#       -> WWWW:   http://www.luismg.com                                       #
#       -> GitHub: https://github.com/luismartingarcia                         #
#                                                                              #
################################################################################

 TABLE OF CONTENTS

  0x01 Introduction.............................................................
  0x02 Downloading Protocol......................................................
  0x03 Installing Protocol......................................................
  0x04 Running Protocol.........................................................
   |_ 0x04.1 Displaying Existing Protocols......................................
   |_ 0x04.2 Displaying Custom Protocols........................................
   |    |_ 0x04.2.1 Field Lists.................................................
   |    |_ 0x04.2.2 Options.....................................................
   |_ 0x04.3 Command-line Options...............................................
  0x05 Examples.................................................................
  0x06 Contact, Support and Bug Reporting.......................................


 0x01 - INTRODUCTION

  Protocol is a simple command-line tool that serves two purposes:

   - Provide a simple way for engineers to have a look at standard network
     protocol headers, directly from the command-line, without having to
     google for the relevant RFC or for ugly header image diagrams.

   - Provide a way for researchers and engineers to quickly generate ASCII
     RFC-like header diagrams for their own custom protocols.

 0x02 - DOWNLOADING PROTOCOL

  The latest version of protocol is available via GitHub. It can be downloaded
  directly from the following website clicking on the button "Download ZIP".

   https://github.com/luismartingarcia/protocol

  Alternatively, the code can be checked out using GIT, running the following
  command:

   git clone https://github.com/luismartingarcia/protocol.git

  If prompted for a username and password, don't enter any, just hit Enter.

  Documentation and extra information is always available through the following
  site:

   http://www.luismg.com/protocol


 0x03 - INSTALLING PROTOCOL

  Protocol can be installed by running the included setup.py script as follows:

   setup.py install

  Note that in order to install Protocol, root or administrative privileges
  are required. On GNU/Linux systems, it can be installed as follows:

   sudo ./setup.py install

 0x04 - RUNNING PROTOCOL

  Once installed, Protocol can be run from the command line. The syntax is
  the following:

   protocol <EXISTING_PROTOCOL_NAME(S)>

  or

   protocol <CUSTOM_PROTOCOL_SPECIFICATION(S)>

  The following subsections describe each approach.

  0x04.1 Displaying Existing Protocols

   The first approach lets users print ASCII headers for existing network
   protocols. In particular, the following protocols are available.

    "ethernet"            : Ethernet
    "8021q"               : IEEE 802.1q
    "dot1q"               : IEEE 802.1q
    "tcp"                 : Transmission Control Protocol (TCP)
    "udp"                 : User Datagram Protocol (TCP)
    "ip"                  : Internet Protocol (IP), version 4.
    "ipv6"                : Internet Protocol (IP), version 6.
    "icmp"                : Internet Control Message Protocol (ICMP)
    "icmp-destination":   : ICMP Destination Unreachable
    "icmp-time"           : ICMP Time Exceeded
    "icmp-parameter"      : ICMP Parameter Problem
    "icmp-source"         : ICMP Source Quench
    "icmp-redirect"       : ICMP Redirect
    "icmp-echo"           : ICMP Echo Request/Reply
    "icmp-timestamp"      : ICMP Timestamp Request/Reply
    "icmp-information"    : ICMP Information Request/Reply
    "icmpv6"              : Internet Control Message Protocol for IPv6 (ICMPv6)
    "icmpv6-destination"  : ICMPv6 Destination Unreachable
    "icmpv6-big"          : ICMPv6 Packet Too Big
    "icmpv6-time"         : ICMPv6 Time Exceeded
    "icmpv6-parameter"    : ICMPv6 Parameter Problem
    "icmpv6-echo"         : ICMPv6 Echo Request/Reply
    "icmpv6-rsol"         : ICMPv6 Router Solicitation
    "icmpv6-radv"         : ICMPv6 Router Advertisement
    "icmpv6-nsol"         : ICMPv6 Neighbor Solicitation
    "icmpv6-nadv"         : ICMPv6 Neighbor Advertisement
    "icmpv6-redirect"     : ICMPv6 Redirect

   One or more of the protocols listed above can be printed. Here are a few
   examples:

    protocol tcp
    protocol dot1q
    protocol tcp udp
    protocol ipv6 icmpv6 icmpv6-redirect

   Note that protocol names don't need to be fully specified, as long as there
   is no ambiguity. For example 'protocol et' is equivalent to 'protocol
   ethernet'. Whenever there is ambiguity (e.g. 'protocol icmpv6-r', a list of
   possible options will be displayed.

    $ protocol icmpv6-r
    Ambiguous protocol specifier 'icmpv6-r'. Did you mean any of these?
      icmpv6-radv
      icmpv6-redirect
      icmpv6-rsol

  0x04.1 Displaying Custom Protocols

   Apart from already existing protocols, Protocol can represent any arbitrary
   protocol headers. In order to do that, instead of specifying the name of
   an existing protocol, a custom protocol specification may be supplied. Such
   specification must follow a simple but specific syntax:

   "<LIST_OF_FIELDS>[?OPTIONS]"

   Where [LIST_OF_FIELDS] is a comma-separated list of protocol field names
   and lengths (expressed in bits), and [?OPTIONS] is an optional part that
   allows users to specify format modifiers for the ASCII header. Note that if
   any of the field names contains spaces, the protocol specification must be
   enclosed in double quotes.

   0x04.2.1 Field Lists

    The most important part of a protocol specification are field lists. This
    is just a comma-separated list of name:length tuples, where name represents
    the text that describes the protocol field and can contain any character,
    except for '?' and length is an integer greater than zero, representing the
    number of bits the field takes in the header. Here are a few examples:

    Type:8,Code:8,Checksum:16,Message Body:64
    Source Port:16,Destination Port:16,Length:16,Checksum:16

    Note that there is no whitespace after the commas. This is a restriction
    that must be respected.

    Also, note that field lengths don't need to align to the length of the
    line. If a particular field is too long, Protocol will just wrap it to the
    next line. Here are some examples:

    $ protocol "Source:16,TTL:8,Reserved:40"
     0                   1                   2                   3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |             Source            |      TTL      |               |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+               +
    |                            Reserved                           |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


    $ protocol "Source:16,Reserved:40,TTL:8"
     0                   1                   2                   3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |             Source            |                               |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+               +-+-+-+-+-+-+-+-+
    |                    Reserved                   |      TTL      |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

    $ protocol "Reserved:32,Target Address:128"
     0                   1                   2                   3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                            Reserved                           |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                                                               |
    +                                                               +
    |                                                               |
    +                         Target Address                        +
    |                                                               |
    +                                                               +
    |                                                               |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


   0x04.2.2 Options

    Once the list of fields has been specified, users may optionally pass
    formatting options to control the way the ASCII header is generated.
    Options are supplied as a comma-separated list of label=value elements.
    The first one is preceded by the '?' sign, which lets Protocol figure out
    where the field list ends and where the list of options begins. The options
    currently available are the following:

    bits=<n>       : Number of bits per line. By default it's 32, same as IETF.
                     This is useful for protocols that don't align perfectly to
                     32-bit words, like Ethernet.
    numbers=<Y/N>  : Instructs protocol to print or avoid printing the bit
                     counts on top of the header.
    evenchar=<c>   : Instructs protocol to use the supplied character, instead
                     of the default "-" as the character in even positions of
                     the horizontal lines.
    oddchar=<c>    : Same as evenchar but for characters in odd positions of the
                     horizontal lines. By default it takes the value '+'
    startchar=<c>  : Instructs protocol to use the supplied character instead
                     of the default "+" for the first position of an horizontal
                     line.
    endchar=<c>    : Same as startchar but for the character in the last
                     position of the horizonal lines.
    sepchar=<c>    : Instructs protocol to use the supplied character instead
                     of the default "|" for the field separator character.

    The following diagram shows the character modifiers described above.

       Bit counts                                                     sepchar(|)
         ^   ^                                                              |
         |   |                                                              |
         |   |                                                              |
         0   |               1                   2                   3      |
         0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1    |
        +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+   |
        |             Source            |      TTL      |    Reserved   | <-+
        +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
        ^              ^ ^ ^              ^ ^ ^                         ^
        |              | | |              | | |                         |
     startchar(+)     evenchar( -)       oddchar(+)                endchar(+)

        |<------------------------------------------------------------->|
                                   bits(32)


  0x04.3 Command-line Options

    Apart from per-protocol format specifiers, Protocol can also be configured
    using command-line parameter. The following list provides a description of
    each option available.

    Usage: protocol {<protocol> or <spec>} [OPTIONS]
    PARAMETERS:
     <protocol>          : Name of an existing protocol
     <spec>              : Field by field specification of non-existing protocol
    OPTIONS:
     -b, --bits <n>      : Number of bits per line
     -f, --file          : Read specs from a text file
     -h, --help          : Displays this help information
     -n, --no-numbers    : Do not print bit numbers on top of the header
     -V, --version       : Displays current version
     --evenchar  <char>  : Character for the even positions of horizontal lines
     --oddchar   <char>  : Character for the odd positions of horizontal lines
     --startchar <char>  : Character that starts horizontal lines
     --endchar   <char>  : Character that ends horizontal lines
     --sepchar   <char>  : Character that separates protocol fields


 0x05 - EXAMPLES

   This section presents additional examples on how to run protocol.

    $ protocol tcp
     0                   1                   2                   3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |          Source Port          |        Destination Port       |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                        Sequence Number                        |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                     Acknowledgment Number                     |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    | Offset|  Res. |     Flags     |             Window            |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |            Checksum           |         Urgent Pointer        |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                    Options                    |    Padding    |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


    $ protocol "Source Port:16,Destination Port:16,Sequence Number:32,\
      Acknowledgment Number:32,Offset:4,Res.:4,Flags:8,Window:16,Checksum:16,\
      Urgent Pointer:16,Options:24,Padding:8"
     0                   1                   2                   3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |          Source Port          |        Destination Port       |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                        Sequence Number                        |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                     Acknowledgment Number                     |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    | Offset|  Res. |     Flags     |             Window            |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |            Checksum           |         Urgent Pointer        |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                    Options                    |    Padding    |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


    $ protocol "Field4:4,Field4:4,Field8:8,Field16:16,Field32:32,Field64:64?\
      bits=16,numbers=y,startchar=*,endchar=*,evenchar=-,oddchar=-,sepchar=|"
     0                   1
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
    *-------------------------------*
    | Field4| Field4|     Field8    |
    *-------------------------------*
    |            Field16            |
    *-------------------------------*
    |                               |
    *            Field32            *
    |                               |
    *-------------------------------*
    |                               |
    *                               *
    |                               |
    *            Field64            *
    |                               |
    *                               *
    |                               |
    *-------------------------------*


    $ protocol ip --bits 16
     0                   1
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |Version|  IHL  |Type of Service|
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |          Total Length         |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |         Identification        |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |Flags|     Fragment Offset     |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |  Time to Live |    Protocol   |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |        Header Checksum        |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                               |
    +         Source Address        +
    |                               |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                               |
    +      Destination Address      +
    |                               |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |            Options            |
    +               +-+-+-+-+-+-+-+-+
    |               |    Padding    |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


    $ protocol udp --oddchar "-" --startchar "-" --endchar "-"
     0                   1                   2                   3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    -----------------------------------------------------------------
    |          Source Port          |        Destination Port       |
    -----------------------------------------------------------------
    |             Length            |            Checksum           |
    -----------------------------------------------------------------


    $ protocol ipv6 --no-numbers
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |Version| Traffic Class |               Flow Label              |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |         Payload Length        |  Next Header  |   Hop Limit   |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                                                               |
    +                                                               +
    |                                                               |
    +                         Source Address                        +
    |                                                               |
    +                                                               +
    |                                                               |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                                                               |
    +                                                               +
    |                                                               |
    +                       Destination Address                     +
    |                                                               |
    +                                                               +
    |                                                               |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


    $ protocol udp icmp
     0                   1                   2                   3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |          Source Port          |        Destination Port       |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |             Length            |            Checksum           |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

     0                   1                   2                   3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |      Type     |      Code     |            Checksum           |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                                                               |
    +                          Message Body                         +
    |                                                               |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


 0x06 - CONTACT, SUPPORT AND BUG REPORTING

   For any questions, bug reports, bug fixes, feature requests, code 
   contributions, etc, please contact me using the e-mail address displayed on
   the header of this file. Please note that Protocol's support is just like 
   IP transport: best-effort. I will do my best to deal with your enquiries but
   no guarantees. Special support packages are available for those willing to
   send me real $$$ via Paypal ;-)


About

An ASCII Header Generator for Network Protocols

http://www.luismg.com/protocol/

License:GNU General Public License v3.0


Languages

Language:Python 100.0%