Disclaimer

This project is in no way related to or created by the official Fedora team or its members. It is solely a project of mine.

FedoraWSL2

Fedora rawhide on WSL2 (Windows 10 FCU or later) based on wsldl.

Features and important information

FedoraWSL2 has the following features during the installation stage.

Increase virtual disk size from the default 256GB
Create a new user and set the user as default
FedoraWSL2 Supports systemd natively if you are running wsl v0.67.6 (more details here) and above. For earlier versions of wsl, systemd is supported using diddledani's one-script-wsl2-systemd. This is done automatically during initial setup.
FedoraWSL2 includes a wsl.conf file which only has section headers. Users can use this to configure the distro to their liking. You can read more about wsl.conf and its configuration settings here.

Requirements

For x64 systems: Version 1903 or higher, with Build 18362 or higher.
For ARM64 systems: Version 2004 or higher, with Build 19041 or higher.
Builds lower than 18362 do not support WSL 2.
If you are running Windows 10 version 2004 or higher, you can install all components required to run wsl2 with a single command. This will install ubuntu by default. More details are available here.
```
 wsl.exe --install
```
If you are running Windows 10 lower then version 2004, follow the steps below to install requirements manually. For more details, check this microsoft document.
- Enable Windows Subsystem for Linux feature.
```
 dism.exe /online /enable-feature /featurename:Microsoft-Windows-Subsystem-Linux /all /norestart
```
- Enable Virtual Machine feature
```
 dism.exe /online /enable-feature /featurename:VirtualMachinePlatform /all /norestart
```
- Download and install the latest Linux kernel update package from here.

Install

Make sure all the steps mentioned under "Requirements" are completed.
Download installer zip
Extract all files in zip file to same directory
Set version 2 as default. Note that this step is required only for manual installation.
```
wsl --set-default-version 2
```
Run Fedora.exe to extract rootfs and register to WSL

Note: Exe filename is using the instance name to register. If you rename it you can register with a diffrent name and have multiple installs.

How-to-Use(for Installed Instance)

exe Usage

Usage :
    <no args>
      - Open a new shell with your default settings.

    run <command line>
      - Run the given command line in that instance. Inherit current directory.

    runp <command line (includes windows path)>
      - Run the given command line in that instance after converting its path.

    config [setting [value]]
      - `--default-user <user>`: Set the default user of this instance to <user>.
      - `--default-uid <uid>`: Set the default user uid of this instance to <uid>.
      - `--append-path <true|false>`: Switch of Append Windows PATH to $PATH
      - `--mount-drive <true|false>`: Switch of Mount drives
      - `--default-term <default|wt|flute>`: Set default type of terminal window.

    get [setting]
      - `--default-uid`: Get the default user uid in this instance.
      - `--append-path`: Get true/false status of Append Windows PATH to $PATH.
      - `--mount-drive`: Get true/false status of Mount drives.
      - `--wsl-version`: Get the version os the WSL (1/2) of this instance.
      - `--default-term`: Get Default Terminal type of this instance launcher.
      - `--lxguid`: Get WSL GUID key for this instance.

    backup [contents]
      - `--tar`: Output backup.tar to the current directory.
      - `--reg`: Output settings registry file to the current directory.
	  - `--tgz`: Output backup.tar.gz to the current directory.
      - `--vhdx`: Output backup.ext4.vhdx to the current directory.
      - `--vhdxgz`: Output backup.ext4.vhdx.gz to the current directory.

    clean
      - Uninstall that instance.

    help
      - Print this usage message.

Just Run exe

>{InstanceName}.exe
[root@PC-NAME user]#

Run with command line

>{InstanceName}.exe run uname -r
4.4.0-43-Microsoft

Run with command line with path translation

>{InstanceName}.exe runp echo C:\Windows\System32\cmd.exe
/mnt/c/Windows/System32/cmd.exe

Change Default User(id command required)

>{InstanceName}.exe config --default-user user

>{InstanceName}.exe
[user@PC-NAME dir]$

Set "Windows Terminal" as default terminal

>{InstanceName}.exe config --default-term wt

How to setup

FedoraWSL2 will ask you to create a new user during its first run. If you chose to create a new user during initial setup, the steps below are not required unless you want to create additional users.

passwd
useradd -m -g users -G wheel -s /bin/bash <username>
echo "%sudo ALL=(ALL) ALL" >/etc/sudoers.d/wheel
passwd <username>
exit

You can set the user you created as default user using 2 methods.

Open Fedora.exe, run the following command (replace username with the actual username you created).

sed -i '/\[user\]/a default = username' /etc/wsl.conf

Shutdown and restart the distro (this step is important).

(or)

Execute the command below in a windows cmd terminal from the directory where Fedora.exe is installed.

>Fedora.exe config --default-user <username>

How to uninstall instance

>Fedora.exe clean

How to backup instance

export to backup.tar.gz

>Fedora.exe backup --tgz

export to backup.ext4.vhdx.gz

>Fedora.exe backup --vhdxgz

How to restore instance

There are 2 ways to do it.

Rename the backup to rootfs.tar.gz and run Fedora.exe

(or)

.tar(.gz)

>Fedora.exe install backup.tar.gz

.ext4.vhdx(.gz)

>Fedora.exe install backup.ext4.vhdx.gz

You may need to run the command below in some circumstances.

>Fedora.exe --default-uid 1000

How to build

Prerequisites

Docker, tar, zip, unzip, bsdtar need to be installed.

git clone git@gitlab.com:sileshn/FedoraWSL2.git
cd FedoraWSL2
make

Copy the FedoraRawhide.zip file to a safe location and run the command below to clean.

make clean

sileshn / FedoraWSL2