This is a port of psutil (https://github.com/giampaolo/psutil). The challenge is porting all psutil functions on some architectures.
From v3.20.10, gopsutil becomes v3 which breaks backwards compatibility. See v3Changes.md for more detailed changes.
gopsutil tag policy is almost same as Semantic Versioning, but automatically increases like Ubuntu versioning.
For example, v2.17.04 means
- v2: major version
- 17: release year, 2017
- 04: release month
gopsutil aims to keep backwards compatibility until major version change.
Tagged at every end of month, but if there are only a few commits, it can be skipped.
- FreeBSD i386/amd64/arm
- Linux i386/amd64/arm(raspberry pi)
- Windows i386/amd64/arm/arm64
- Darwin amd64/arm64
- OpenBSD i386/amd64/armv7/arm64/riscv64 (Thank you @mpfz0r!)
- Solaris amd64 (developed and tested on SmartOS/Illumos, Thank you @jen20!)
These have partial support:
- CPU on DragonFly BSD (#893, Thank you @gballet!)
- host on Linux RISC-V (#896, Thank you @tklauser!)
All works are implemented without cgo by porting C structs to golang structs.
package main
import (
"fmt"
"github.com/shirou/gopsutil/v3/mem"
// "github.com/shirou/gopsutil/mem" // to use v2
)
func main() {
v, _ := mem.VirtualMemory()
// almost every return value is a struct
fmt.Printf("Total: %v, Free:%v, UsedPercent:%f%%\n", v.Total, v.Free, v.UsedPercent)
// convert to JSON. String() is also implemented
fmt.Println(v)
}The output is below.
Total: 3179569152, Free:284233728, UsedPercent:84.508194%
{"total":3179569152,"available":492572672,"used":2895335424,"usedPercent":84.50819439828305, (snip...)}
You can set an alternative location to /proc by setting the HOST_PROC
environment variable.
You can set an alternative location to /sys by setting the HOST_SYS
environment variable.
You can set an alternative location to /etc by setting the HOST_ETC
environment variable.
You can set an alternative location to /var by setting the HOST_VAR
environment variable.
You can set an alternative location to /run by setting the HOST_RUN
environment variable.
You can set an alternative location to /dev by setting the HOST_DEV
environment variable.
You can set an alternative location to / by setting the HOST_ROOT
environment variable.
You can set an alternative location to /proc/N/mountinfo by setting the
HOST_PROC_MOUNTINFO environment variable.
As of v3.23.6, it is now possible to pass a path location using context: import "github.com/shirou/gopsutil/v3/common" and pass a context with common.EnvMap set to common.EnvKey, and the location will be used within each function.
ctx := context.WithValue(context.Background(),
common.EnvKey, common.EnvMap{common.HostProcEnvKey: "/myproc"},
)
v, err := mem.VirtualMemoryWithContext(ctx)
First priority is given to the value set in context, then the value from the environment variable, and finally the default location.
As of v3.24.1, it is now possible to cached some values. These values default to false, not cached.
Be very careful that enabling the cache may cause inconsistencies. For example, if you enable caching of boottime on Linux, be aware that unintended values may be returned if the boottime is changed by NTP after booted.
host- EnableBootTimeCache
process- EnableBootTimeCache
See https://pkg.go.dev/github.com/shirou/gopsutil/v3 or https://godocs.io/github.com/shirou/gopsutil/v3
- go1.16 or above is required.
Several methods have been added which are not present in psutil, but will provide useful information.
- host/HostInfo() (linux)
- Hostname
- Uptime
- Procs
- OS (ex: "linux")
- Platform (ex: "ubuntu", "arch")
- PlatformFamily (ex: "debian")
- PlatformVersion (ex: "Ubuntu 13.10")
- VirtualizationSystem (ex: "LXC")
- VirtualizationRole (ex: "guest"/"host")
- IOCounters
- Label (linux only) The registered device mapper name
- cpu/CPUInfo() (linux, freebsd)
- CPU (ex: 0, 1, ...)
- VendorID (ex: "GenuineIntel")
- Family
- Model
- Stepping
- PhysicalID
- CoreID
- Cores (ex: 2)
- ModelName (ex: "Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz")
- Mhz
- CacheSize
- Flags (ex: "fpu vme de pse tsc msr pae mce cx8 ...")
- Microcode
- load/Avg() (linux, freebsd, solaris)
- Load1
- Load5
- Load15
- docker/GetDockerIDList() (linux only)
- container id list ([]string)
- docker/CgroupCPU() (linux only)
- user
- system
- docker/CgroupMem() (linux only)
- various status
- net_protocols (linux only)
- system wide stats on network protocols (i.e IP, TCP, UDP, etc.)
- sourced from /proc/net/snmp
- iptables nf_conntrack (linux only)
- system wide stats on netfilter conntrack module
- sourced from /proc/sys/net/netfilter/nf_conntrack_count
Some code is ported from Ohai. Many thanks.
- x: works
- b: almost works, but something is broken
| name | Linux | FreeBSD | OpenBSD | macOS | Windows | Solaris | Plan 9 |
|---|---|---|---|---|---|---|---|
| cpu_times | x | x | x | x | x | b | |
| cpu_count | x | x | x | x | x | x | |
| cpu_percent | x | x | x | x | x | ||
| cpu_times_percent | x | x | x | x | x | ||
| virtual_memory | x | x | x | x | x | b | x |
| swap_memory | x | x | x | x | x | ||
| disk_partitions | x | x | x | x | x | ||
| disk_io_counters | x | x | x | ||||
| disk_usage | x | x | x | x | x | ||
| net_io_counters | x | x | x | b | x | ||
| boot_time | x | x | x | x | x | ||
| users | x | x | x | x | x | ||
| pids | x | x | x | x | x | ||
| pid_exists | x | x | x | x | x | ||
| net_connections | x | x | x | x | |||
| net_protocols | x | ||||||
| net_if_addrs | |||||||
| net_if_stats | |||||||
| netfilter_conntrack | x |
| name | Linux | FreeBSD | OpenBSD | macOS | Windows |
|---|---|---|---|---|---|
| pid | x | x | x | x | x |
| ppid | x | x | x | x | x |
| name | x | x | x | x | x |
| cmdline | x | x | x | x | |
| create_time | x | x | x | ||
| status | x | x | x | x | |
| cwd | x | x | x | ||
| exe | x | x | x | x | |
| uids | x | x | x | x | |
| gids | x | x | x | x | |
| terminal | x | x | x | ||
| io_counters | x | x | x | x | |
| nice | x | x | x | x | x |
| num_fds | x | ||||
| num_ctx_switches | x | ||||
| num_threads | x | x | x | x | x |
| cpu_times | x | x | |||
| memory_info | x | x | x | x | x |
| memory_info_ex | x | ||||
| memory_maps | x | ||||
| open_files | x | ||||
| send_signal | x | x | x | x | |
| suspend | x | x | x | x | |
| resume | x | x | x | x | |
| terminate | x | x | x | x | x |
| kill | x | x | x | x | |
| username | x | x | x | x | x |
| ionice | |||||
| rlimit | x | ||||
| num_handlers | |||||
| threads | x | ||||
| cpu_percent | x | x | x | x | |
| cpu_affinity | |||||
| memory_percent | x | x | |||
| parent | x | x | x | x | |
| children | x | x | x | x | x |
| connections | x | x | x | ||
| is_running | |||||
| page_faults | x |
| item | Linux | FreeBSD | OpenBSD | macOS | Windows | Solaris |
|---|---|---|---|---|---|---|
| HostInfo | ||||||
| hostname | x | x | x | x | x | x |
| uptime | x | x | x | x | x | |
| process | x | x | x | x | ||
| os | x | x | x | x | x | x |
| platform | x | x | x | x | x | |
| platformfamily | x | x | x | x | x | |
| virtualization | x | |||||
| CPU | ||||||
| VendorID | x | x | x | x | x | x |
| Family | x | x | x | x | x | x |
| Model | x | x | x | x | x | x |
| Stepping | x | x | x | x | x | x |
| PhysicalID | x | x | ||||
| CoreID | x | x | ||||
| Cores | x | x | x | |||
| ModelName | x | x | x | x | x | x |
| Microcode | x | x | ||||
| LoadAvg | ||||||
| Load1 | x | x | x | x | ||
| Load5 | x | x | x | x | ||
| Load15 | x | x | x | x | ||
| GetDockerID | ||||||
| container id | x | no | no | no | no | |
| CgroupsCPU | ||||||
| user | x | no | no | no | no | |
| system | x | no | no | no | no | |
| CgroupsMem | ||||||
| various | x | no | no | no | no |
- future work
- process_iter
- wait_procs
- Process class
- as_dict
- wait
New BSD License (same as psutil)
I have been influenced by the following great works:
- psutil: https://github.com/giampaolo/psutil
- dstat: https://github.com/dagwieers/dstat
- gosigar: https://github.com/cloudfoundry/gosigar/
- goprocinfo: https://github.com/c9s/goprocinfo
- go-ps: https://github.com/mitchellh/go-ps
- ohai: https://github.com/opscode/ohai/
- bosun: https://github.com/bosun-monitor/bosun/tree/master/cmd/scollector/collectors
- mackerel: https://github.com/mackerelio/mackerel-agent/tree/master/metrics
- Fork it
- Create your feature branch (git checkout -b my-new-feature)
- Commit your changes (git commit -am 'Add some feature')
- Push to the branch (git push origin my-new-feature)
- Create new Pull Request
English is not my native language, so PRs correcting grammar or spelling are welcome and appreciated.