sghnsk's repositories
attiny85_rgb_ws2812
Example ws2812 on attiny85 with Adafruit_NeoPixel
Marlin_1.1.19
Стабильная версия Marlin 1.1.19 настройки под Anycubic Kossel Linear Plus
TrinketHidCombo
Copied from https://github.com/adafruit/Adafruit-Trinket-USB/tree/master/TrinketKeyboard
dht11_display_meter
показометр температуры/влажности с DHT11+DS18B20
grbl_1.1
Прошивка grbl для сборки через platformio
kicad-ESP8266
Schematic symbols and PCB footprints for ESP8266 modules
klipper
Klipper is a 3d-printer firmware
Marlin_2.0
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
Marlin_FB4S
Marlin 2.0 for Flying Bear 4S/5
MCAD
OpenSCAD Parametric CAD Library (LGPL 2.1)
MKS-Robin-Nano-V1.X
MKS Robin Nano is a powerful 32-bit 3D printer control board with STM32F103VET6. Support Marlin2.0. Support MKS Robin TFT24/28/32/35/43 touch Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 1 MAX31855.The motherboard integrates After shutdown. Support MKS Robin WIFI for cloud printing and supports firmware update by SD card…
MKS-SGEN_L-V2
MKS SGEN_L V2.0 is powerful 32-bit 3D printer control board. The CPU is LPC1769 120MHZ, SGEN_L V2 hardware Integrated 4KB EEPROM, 5AXIS and dual Z interface, has 2 way FANs and Dc12/24V out interface, support TMC UART and SPI mode...
OctoPrint-EasyServo
Here is a simple plugin to control 2 servos using the OctoPrint Control tab. It can be used for example to move your camera wirelessly
OctoPrint-Enclosure
OctoPrint Enclosure Plugin
OctoPrint-Telegram
Plugin for octoprint to send status messages and receive commands via Telegram messenger.
OctoScreen
LCD touch interface for our Octoprint
qc3_trigger
qc3 attiny trigger (simple)
qmk_firmware
Open-source keyboard firmware for Atmel AVR and Arm USB families
sht30_display_meter
Показометр температуры/влажности на sht30
smart-domofon
Smart intercom with MQTT based on NodeMCUv3
test_TrinketKeyboard
пример с TrinketKeyboard с индикацией включенного scroll lock
tmk_keyboard
Keyboard firmwares for Atmel AVR and Cortex-M
TrinketKeyboard
Copied from https://github.com/adafruit/Adafruit-Trinket-USB/tree/master/TrinketKeyboard
ZB-Bridge-P
Sonoff ZB-Bridge-P