Standard libaries for use in your projects. These include:
- Resistors
- Capacitors
- Inductors
- Diodes
- Transistors
- Interfaces
Run in the terminal:
```ato install generics``
Add to your ato project:
- Resistors
import Resistor from "generics/resistor.ato - Capacitors
import Capacitor from "generics/capacitor.ato - Inductors
import Inductor from "generics/inductor.ato - Interfaces
import Interface from "generics/interface.ato - etc...
The standard libary includes several thousand resistor options. In your ato project, simply specify any requirements and the best resistor will be automatically selected. Example:
import Resistor from "generics/resistor.ato"
myResistor = new Resistor
myResistor.value = 1000
myResistor.footprint = "R0402"
myResistor.tolerance = 10
The solver will find a resistor that has a resistance between 900 and 1100 ohms accounting for tolerance, and a footprint of R0402.
Similar to resistors, just specify the value and footprint and the solver will find the best capacitor for your application.
Currently not supported for automatic selection, but you can install any inductor you like using '''ato install''' and then use it in your project.
We strongly reccomend using subclassing for new components, something like this:
import Inductor from "generics/inductor.ato"
component MyInductor from Inductor:
value = 1000
footprint = "L0402"
Then you can use it in your project like this:
import MyInductor from "myInductor.ato"
myInductor = new MyInductor
myInductor.value = 1000
myInductor.footprint = "L0402"
Interfaces standardize the way you connect to modules. By implementing an interface from the standard libary, you can be sure that your module will be compatible with any other module that implements the same interface. This makes it easy to share modules between projects and be sure that they will work together.
We welcome contributions and suggestions to improve this module. Please submit your contributions as pull requests on our GitHub repository.
This package documentation is provided under the MIT License.
For further inquiries or support, please contact us at email@example.com.