septentrio-gnss / Septentrio-SUPL-3GPP-LPP

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Septentrio SUPL-3GPP-LPP-client

This repository is a fork from the SUPL-3GPP-LPP-client made by Ericsson. It contains additional support for Septentrio GNSS receiver to provide location data information.


Objective

The primary goal of this repository is to facilitate the use of the LPP protocol over SUPL with a Septentrio GNSS receiver, facilitating the delivery of OSR RTCM corrections.

Getting Started

To get started with the SUPL-3GPP-LPP-client and a Septentrio receiver, follow the getting started guide.

This guide contains instruction on how to build and use the client as well as instructions on how to set up the receiver and modem.

Tested Setup

The following setup was tested and is confirmed to work with the 3GPP LPP client.

  • SBC : Raspberry Pi 4B (OS: Raspberry PI OS 64bit - 2023/05/03)
  • GNSS Receiver : Septentrio Mosaic-Go
  • Modem : D-Link DWM-222 (HW Ver: A2, SW Ver: 2.0.1 EU)

What is SUPL ?

The SUPL (Secure User Plane Location) protocol is an IP protocol designed to transmit essential information for Assisted GPS (A-GPS) over a mobile network.

What is LPP ?

LTE positioning protocol (LPP) is a point-to-point protocol that allows multiple connections to different devices and is used to position the target device. LPP provides support for GNSS based positioning, network based positioning and hybrid – a combination of both GNSS and network based positioning.

How to buy a Mosaic-GO unit ?

You can buy a Mosaic-GO receiver directly from digikey (link).

Client

SUPL-3GPP-LPP-client is an example client for that connects to a location server using SUPL and requests assistance data using 3GPP LPP (Release 16.4). The code contains libraries for building a custom client for your specific needs. The example client is written in C++ and is designed to be portable and easy to use. It should be sufficient to get started or use as a simple client for testing.

The source code for the ASN.1 definitions from 3GPP LPP Release 16.4 are generated by ASN.1 C (https://github.com/vlm/asn1c). All other code is in C++ and should be portable to must unix-like systems. The example client is tested on Ubuntu 20.04 and Raspberry PI OS (32-bit) with gcc-4.8.

License

See LICENSE file.

About

License:Other


Languages

Language:C 91.0%Language:C++ 8.9%Language:CMake 0.1%Language:Roff 0.0%Language:Shell 0.0%