selfuryon / netdev

Asynchronous multi-vendor library for interacting with network devices

THIS PROJECT IS UNMAINTAINED

I'm not interested in this project anymore, sorry. I don't work as an network engineer anymore so I haven't any special goals to improve and maintain it.

Netdev

Asynchronous multi-vendor library for interacting with network devices

Inspired by netmiko

Requires:

• asyncio
• AsyncSSH
• Python >=3.5
• pyYAML

Supports:

• Cisco IOS
• Cisco IOS XE
• Cisco IOS XR
• Cisco ASA
• Cisco NX-OS
• Cisco SG3XX
• HP Comware (like V1910 too)
• Fujitsu Blade Switches
• Mikrotik RouterOS
• Arista EOS
• Juniper JunOS
• Aruba AOS 6.X
• Aruba AOS 8.X
• Terminal
• Alcatel AOS

Examples:

Example of interacting with Cisco IOS devices:

import asyncio
import netdev

async def task(param):
    async with netdev.create(**param) as ios:
        # Testing sending simple command
        out = await ios.send_command("show ver")
        print(out)
        # Testing sending configuration set
        commands = ["line console 0", "exit"]
        out = await ios.send_config_set(commands)
        print(out)
        # Testing sending simple command with long output
        out = await ios.send_command("show run")
        print(out)
        # Testing interactive dialog
        out = await ios.send_command("conf", pattern=r'\[terminal\]\?', strip_command=False)
        out += await ios.send_command("term", strip_command=False)
        out += await ios.send_command("exit", strip_command=False, strip_prompt=False)
        print(out)


async def run():
    dev1 = { 'username' : 'user',
             'password' : 'pass',
             'device_type': 'cisco_ios',
             'host': 'ip address',
    }
    dev2 = { 'username' : 'user',
             'password' : 'pass',
             'device_type': 'cisco_ios',
             'host': 'ip address',
    }
    devices = [dev1, dev2]
    tasks = [task(dev) for dev in devices]
    await asyncio.wait(tasks)


loop = asyncio.get_event_loop()
loop.run_until_complete(run())