MiniDox-Slim
Repository contains Eagle and STL files for MiniDox-Slim.
Original MiniDox is created by u/That-Canadian on reddit, and can be found here: https://github.com/That-Canadian/MiniDox_PCB
To make your own: Keypad PCB MUST be 0.6mm thick or thinner. Control board PCB MUST be 1.6mm thick.
Recommended parts:
- Diode: https://www.digikey.ca/product-detail/en/micro-commercial-co/1N4148W-TP/1N4148WTPMSCT-ND/717311
- TRRRS Jack: https://www.digikey.ca/product-detail/en/cui-devices/SJ-43614-SMT-TR/CP-43614SJCT-ND/2625179 TRRRS Jack will need slight trimming to fit.
Assembly instructions will be posted after second set is build. Whenever that may be.