Introducing Arturo
A command-line tool for Arduino 1.6.1 or earlier
This is a fork from ino/master. The original ino contributors did a fantastic job but they decided they no longer had time to maintain this tool. I asked them if they wanted me to take over ino but they preferred that I fork it. And so Arturo was born.
Unfortunatly the Arduino IDE completely changed 3p integration in version 1.6.2 and Arturo is currently broken for this version. I will try to fix this but it will require a significant rewrite and could take some time.
Stay tuned for more details and changes. I do plan on going through the existing ino PRs and issues to see if there's anything I can fix.
I am looking for other contributors as well. I especially need Windows and Linux testers as I'm doing all this work on a mac.
Installing Arturo
Clone this repo, cd Arturo, make install. On Linux you may need to use sudo make install.
Remember that the Arturo command is ano. It should not conflict in any way
with ino and you can install the two side-by-side (please file any issues if this
is not true).
You might want to add the new .build_ano build output folder to your .gitignore.
Getting Started
There is an excellent getting started guide for ino that contains everything you should need to get the Blink program running on your board.
Troubleshooting
HALP! I am getting:
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00
...
The -m flag is particularly important and your upload may fail with the above error if
you did not include it.
For information about ano commands run:
ano --help
and
ano <subcommand> --help