Network UPS Tools server

Docker image for Network UPS Tools server version 2.8.1 for Legrand UPS.

Usage

This image provides a complete UPS monitoring service (USB driver only).

Start the container:

# docker run \
	--name nut \
	--detach \
	--publish 3493:3493 \
	--device /dev/bus/usb/xxx/yyy \
  -v ./config/ups.conf:/etc/nut/ups.conf \
  -v ./config/upsd.conf:/etc/nut/upsd.conf \
  -v ./config/upsd.users:/etc/nut/upsd.users \
  -v ./config/upsmon.conf:/etc/nut/upsmon.conf \
	satblip/nut

Configuration via configuration files

This image needs to be configured via the file that you can find in the config directory. Token are in place in those files, here are the values you need to replace:

UPS_NAME

Example value: ups

The name of the UPS.

UPS_DESC

Example value: Eaton 5SC

This allows you to set a brief description that upsd will provide to clients that ask for a list of connected equipment.

UPS_DRIVER

Example value: usbhid-ups

This specifies which program will be monitoring this UPS.

UPS_PORT

Example value: auto

This is the serial port where the UPS is connected.

API_USER

Example value: upsmon

This is the username used for communication between upsmon and upsd processes.

API_PASSWORD

Example value: secret

This is the password for the upsmon user.

SHUTDOWN_CMD

Example value: echo 'System shutdown not configured!'

This is the command upsmon will run when the system needs to be brought down. The command will be run from inside the container.

satblip / nut