chuni-virtual-base-server

Chunithm virtual base server SDBT_1.35 (Chunithm Amazon Plus 1.35)

Source: https://gist.github.com/esterTion/d03d8f80e497181026f2c1fd73598547

Ported Node.js & fixed 1.35 by Sannoob#3144

Steps

0. Install node.js & run

Install node.js this link https://nodejs.org/

0-1. Download it & install

After installation, you can test it with the following command node --version

C:\>node --version
v12.18.3

0-2. Clone & Configure the server

0-2-1. Clone & Install dependencies

Clone repository (or download it)

C:\>git clone https://github.com/sannoob/chuni-virtual-base-server
Cloning into 'chuni-virtual-base-server'...
remote: Enumerating objects: 5, done.
remote: Counting objects: 100% (5/5), done.
Receiving objects:  60% (3/5)100% (5/5), done.
Receiving objects: 100% (5/5), done

Change directory to ./chuni-virtual-base-server

C:\>cd ./chuni-virtual-base-server

Install node dependencies

C:\chuni-virtual-base-server\>npm install
[            ......] - extract:es6-promise: sill extract es6-promise@4.2.8 extracted to C:\chuni-virtual-base-server

0-2-2. Edit config.js (before edit rename config.inc.js to config.js)

module.exports = {
  tcpListenIp: '0.0.0.0', // TCP Server Listening IP (I don't recommend changing this)
  hostIp: '192.168.191.153', // Server Host IP (runs this app)
  broadCastIp: '192.168.191.255', // Host IP's broadcast address (example: 192.168.100.101 -> 192.168.100.255)
  broadCastInterval: 1000 // Broadcast interval (ms) 1sec = 1000ms
}

0-2-3. Run Server

Using npm run start or start.bat

Start server

C:\chuni-virtual-base-server\>npm run start
> chuni-virtual-base-server@0.1.0 start C:\chuni-virtual-base-server
> node ./virtualbaseserver

Configs
tcpListenIp: 0.0.0.0 hostIp: 192.168.191.153
broadCastIp 192.168.191.255 broadCastInterval 1000 (broadcast between 1 seconds)
UDP1 Broadcast true 0.0.0.0:50001
UDP1 Listening on 0.0.0.0:50001
UDP2 Broadcast true 0.0.0.0:50001
UDP2 Listening on 0.0.0.0:50003
TCP1 Listening on 0.0.0.0:50001

Server is running!

1. Basic Setup

1-1. patch chuniApp.exe (SDBT_1.35.00/app/bin/chuniApp.exe)

Head-to-head patch to chuniApp.exe from https://mon.im/bemanipatcher/chuniamazon.html

1-2. copy & paste option files

You need to copy all files in SDBT_1.35.00/option folder and paste them into SDBT_1.35.00/app/data folder (folders like AXXX)

2. segatools.ini setup

Open segatools.ini with your favorite editor (I recommended Notepad++)

2-1. [netenv] / addrSuffix / routerSuffix

Add this lines below [netenv]

addrSuffix=XXX
routerSuffix=XXX

addrSuffix is the LAN suffix.
If your ip is 192.168.191.101 then addrSuffix is 101.

routerSuffix is your router suffix If your router's ip is 192.168.191.1 then routerSuffix is 1 If you don't have a router IP using a service like Zerotier, set the same value as addrSuffix.

2-2. [keychip] / subnet

Subnet must start with 192.168. Edit subnet like this

subnet=192.168.100.0

For Example, if your ip is 192.168.191.101 -> 192.168.191.0 is your /24 subnet

sannoob3144 / chuni-virtual-base-server