Thu Jun 30 10:48:31 PDT 2016
SecuGen FDx SDK PRO for Unix/Linux
Version 3.8.0
#################################################################
Updating '.':
At revision 1228.
================================================================
Release Notes:
=================================================================
1. This version supports the following SecuGen devices:
USB Hamster PRO VID:0x1162 PID:0x2201 (UPx class device)
USB Hamster PRO 20 VID:0x1162 PID:0x2200 (U20 class device)
USB Hamster IV VID:0x1162 PID:0x2000 (SDU04P class device)
USB Hamster Plus VID:0x1162 PID:0x1000 (SDU03P class device)
USB Hamster IV VID:0x1162 PID:0x330 (FDU04 class device)
USB Hamster Plus VID:0x1162 PID:0x322 (SDU03M class device)
USB Hamster Plus VID:0x1162 PID:0x320 (FDU03 class device)
2. This version supports (has been tested with) the following Linux versions:
(x86)
UBUNTU 14.04
Linux ubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux
libusb-0.1-4:i386
gcc (Ubuntu 4.8.2-19ubuntu1) 4.8.2
java version "1.6.0_45"
(x64)
UBUNTU 14.04
Linux ubuntu 3.13.0-87-generic #133-Ubuntu SMP Tue May 24 18:32:09 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
libusb-0.1-4:amd64
gcc version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04)
java version "1.6.0_36"
=================================================================
SYSTEM INSTALLATION NOTES
=================================================================
1. Install the following packages if not already installed on your system.
libgtk2.0-dev (2.24.23-0ubuntu1)
2. Install the SecuGen USB Device Drivers
cd <install_dir>/lib/linux
make install
If you need to uninstall, the command is (make uninstall)
3. By default, only the root user can access the SecuGen USB device because the device requires
write permissions, To allow non-root users to use the device, perform the following steps:
3.1 Create a SecuGen Group
# groupadd SecuGen
3.2 Add fingerprint users to the SecuGen group.
#gpasswd -a myUserID SecuGen
(substitute user name for myUserID)
3.3 Create a file in /etc/udev/rules.d/99SecuGen.rules.
Add the following lines:
ATTRS{idVendor}=="1162", ATTRS{idProduct}=="0320", SYMLINK+="input/fdu03-%k", MODE="0660", GROUP="SecuGen"
ATTRS{idVendor}=="1162", ATTRS{idProduct}=="0322", SYMLINK+="input/sdu03m-%k", MODE="0660", GROUP="SecuGen"
ATTRS{idVendor}=="1162", ATTRS{idProduct}=="0330", SYMLINK+="input/fdu04-%k", MODE="0660", GROUP="SecuGen"
ATTRS{idVendor}=="1162", ATTRS{idProduct}=="1000", SYMLINK+="input/sdu03p-%k", MODE="0660", GROUP="SecuGen"
ATTRS{idVendor}=="1162", ATTRS{idProduct}=="2000", SYMLINK+="input/sdu04p-%k", MODE="0660", GROUP="SecuGen"
ATTRS{idVendor}=="1162", ATTRS{idProduct}=="2200", SYMLINK+="input/sdu05-%k", MODE="0660", GROUP="SecuGen"
KERNEL=="uinput", MODE="0660", GROUP="SecuGen"
3.4 Reboot
4. Plug in the SecuGen USB fingerprint reader
5. Now you are ready to run the demo programs in the
<installdir>/bin/linux directory
6. When running GTK+ applications from the command-line, you may get
the following error message:
Gtk-WARNING **: Failed to load module "libcanberra-gtk-module.so": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory
$ echo $GTK_MODULES
canberra-gtk-module
$ export GTK-MODULES=
7. Binaries linked with Hamster Plus driver are appended with "_fdu03"
8. Binaries linked with Hamster IV driver are appended with "_fdu04"
9. Binaries linked with Hamster PRO 20 driver are appended with "_fdu05"
10. Binaries linked with Hamster PRO driver are appended with "_fdu06"
11. Configuration for java applications
libjnisgfplib.so supports only one class of SecuGen device at a time.
The default configuration is for the SecuGen UPx device.
Configuration for Hamster Plus
cd <install_dir>/lib/linux3
cp libjnisgfplib.so.3.8.0.fdu03_rename libjnisgfplib.so
make uninstall install
Configuration for Hamster IV
cd <install_dir>/lib/linux3
cp libjnisgfplib.so.3.8.0.fdu04_rename libjnisgfplib.so
make uninstall install
Configuration for Hamster PRO 20
cd <install_dir>/lib/linux3
cp libjnisgfplib.so.3.8.0.fdu05_rename libjnisgfplib.so
make uninstall install
Configuration for Hamster PRO
cd <install_dir>/lib/linux3
cp libjnisgfplib.so.3.8.0.fdu06_rename_default libjnisgfplib.so
make uninstall install
=================================================================
Java development
=================================================================
JDK version 1.6.0_36 or later is required for distributions supporting Java
=================================================================
Bug Fixes/Enhancements
=================================================================
v3.8.0 REV1228 2016-6-30 Added support for NFIQ
Addes support for Hamster Pro (HUPx)
v3.7.1 REV883 2015-6-23 Added support for Java in Rasperry Pi/Rasbian JDK1.8
v3.7.1 REV576 2014-3-14 Rebuilt 64bit release using JDK1.6
v3.7.1 REV570 2014-3-7 Release Build
v3.7.0 REV477 2014-1-2 Hamster PRO 20 is now supported
v3.5.6 REV329 2013-2-25 Java now supported
v3.5.5 REV311 2013-2-13 Multiple devices of same class now supported.
FDU04 and FDU03 class devices cannot be used
concurrently within the same application. Multiple
FDU04 class devices can be used concurrently.
Multiple FDU03 class devices can be used concurrently.
Fixed null S/N returned for SDU03M and SDU03P
v3.5.4 REV232 2012-09-28 Fixed auto on sample code
v3.5.4 REV219 2012-09-28 Added support for 512KB SDU04P
Fixed problem with exposure settings. Image quality is
improved
v3.5.3 RC1 2012-06-25 Add support for SDU04P, FDU03 and SDU03P
v3.5.3 Beta1 2009-12-10 Initial Release
=================================================================
Building the demo programs
=================================================================
-------------------------------------------------------------------------
FPLIB TEST SAMPLE
cd <installdir>/sgfplibtest
make
../bin/linux/sgfplibtest_fdu05 to run the program with Hamster PRO 20
../bin/linux/sgfplibtest_fdu04 to run the program with Hamster IV
../bin/linux/sgfplibtest_fdu03 to run the program with Hamster Plus
-------------------------------------------------------------------------
AUTO_ON TEST SAMPLE
cd <installdir>/auto_on
make
../bin/linux/auto_on_fdu05 to run the program with Hamster PRO 20
../bin/linux/auto_on_fdu04 to run the program with Hamster IV
../bin/linux/auto_on_fdu03 to run the program with Hamster Plus
-----------------------------------------------------------------
SECUGEN DIAGNOSTIC SAMPLE
cd <installdir>/sgd2
make
../bin/linux/sgd2_fdu05 to run the program with Hamster PRO 20
../bin/linux/sgd2_fdu04 to run the program with Hamster IV
../bin/linux/sgd2_fdu03 to run the program with Hamster Plus
-----------------------------------------------------------------
FPMATCHER SAMPLE
cd <installdir>/fpmatcher
make
../bin/linux/fpmatcher_fdu05 to run the program with Hamster PRO 20
../bin/linux/fpmatcher_fdu04 to run the program with Hamster IV
../bin/linux/fpmatcher_fdu03 to run the program with Hamster Plus
-----------------------------------------------------------------
=================================================================
Running the Java Samples
=================================================================
-----------------------------------------------------------------
FPLIB TEST SAMPLE
cd <installdir>/java
.sudo ./run_jsgfplibtest.sh
-----------------------------------------------------------------
SGD SWING SAMPLE
cd <installdir>/java make
.sudo ./run_jsgd.sh
-----------------------------------------------------------------
MULTIPLE DEVICE SAMPLE
cd <installdir>/java
.sudo ./run_jsgmultidevicetest.sh
-----------------------------------------------------------------