ElimuPi BaseBuild
This is a fork of the Rachel image builder adapted for DEAN.
Purpose is to provide a classroom environment for educational project in Tanzania and Kenia. Its purpose it to provide full Android tablet support without any direct internet connectivity.
Please visit http://www.dean.ngo/ict4e/digital-classroom-box-elimupi/ for more information
Introduction
THIS IS WORK IN PROGRESS: DO NOT USE!!!! -- All code will be ported to Python --
Functions
This version of the ElimuPi build supports:
- Secured WiFi access point
- Local DHCP, DNS
- FDROID Android application store
- Web pages for management of the sytem and content management (WordPress)
- WiKiPedia alike functions (KiWix)
- Mail and calender functionality (Citadel)
- Dynamic content addition through USB storage
Installation
-
Install a base RaspBian image on a SD card and insert it into the RaspberryPi.
-
Create a empty file called 'ssh' in the root of the boot partition
-
Powerup the RaspberryPi and wait for the initial boot process to complete
-
Logon with user pi (password: raspberry)
-
Expand your microSD card partition
sudo raspi-configsudo reboot -
paste in the following command after reboot.
wget https://raw.githubusercontent.com/elumipi/BaseBuild/master/ElimuPi_installer.py && chmod 700 ElimuPi_installer.py && ./ElimuPi_installer.py
Please note that this will change the 'pi' user's password to: elimupi
All default username and passwords will be elimupi/elimupi unless noted differently.
*NOTE1: This install is tested to work with 2017-09-07-raspbian-stretch-lite
and 2018-03-13-raspbian-stretch-lite
*NOTE2: for WIFI to work on the RaspberryPi 2 unit, you must have the WIFI USB dongle inserted during installation so that the install script can configure it properly. RaspberryPi 3 models have on board WiFi and don't need a WIFI USB dongle.
Last updated : 2017/12/6
Original source : https://github.com/rachelproject/rachelpios