roblandry / netgear-enhanced-integration

Supported

The supported sensors are:

• Firmware
• App Firmware 🆕
• Device Config 🆕
• Access Control Status
• Traffic Meter
• Traffic Meter Enabled
• Traffic Meter Opt
• LAN Config 🆕
• WAN Info 🆕
• Parental Control Enabled
• All MAC Addresses
• DNS Masq
• Info
• Supported Features
• Speed Test Result
• QOS Enabled
• Bandwidth Control
• 2G Guest Wifi
• 5G Guest Wifi
• WPA Security Key
• 5G WPA Security Key
• 2G Info
• 5G Info
• Channel 🆕
• 2G Guest Wifi Info
• 5G Guest Wifi Info
• Smart Connect 🆕

The supported switches are:

• Access Control
• Traffic Meter
• Parental Control
• QOS
• 2.4g Guest WiFi
• 5g Guest WiFi
• Run Speed Test (switch will always toggle to off)
• Reboot Router (switch will always toggle to off)

Setup

• Create the netgear_enhanced folder in custom_components.
• Copy the files to the netgear_enhanced folder.

For sensors

• Place the following code in your config under sensor:
  • Make sure to modify the parameters to fit your needs. It may cause some strain to have too many sensors polling data.

  - platform: netgear_enhanced
    host: !secret my_secret_ip
    username: !secret my_secret_netgear_user
    password: !secret my_secret_netgear_pass
    resources:
      - firmware
      - check_app_fw
      - get_device_config_info
      - access_control_on
      - traffic_meter
      - traffic_meter_on
      - traffic_meter_options
      - get_lan_config_info
      - get_wan_ip_info
      - parental_control_on
      - mac_address
      - dns_masq
      - info
      - supported_features
      - speed_test_result
      - qos_enabled
      - bw_control
      - 2g_guest_wifi_on
      - 5g_guest_wifi_on
      - 2g_wpa_key
      - 5g_wpa_key
      - 2g_wifi_info
      - 5g_wifi_info
      - get_channel
      - 2g_guest_wifi_info
      - 5g_guest_wifi_info
      - get_smart_conn

For switches

• Place the following code in your config under switch:
  • Make sure to modify the parameters to fit your needs. There may be some delay in updating the switch due to the router changing configuration.

  - platform: netgear_enhanced
    host: !secret my_secret_ip
    username: !secret my_secret_netgear_user
    password: !secret my_secret_netgear_pass
    resources:
      - 'access_control'
      - 'traffic_meter'
      - 'parental_control'
      - 'qos'
      - '2g_guest_wifi'
      - '5g_guest_wifi'
      - 'run_speed_test'
      - 'reboot'