Windows Prebuild installer available, check out releases page on github Last build on Visual Studio 2022, both 32 and 64 bit builds tested. Open Solution gm0.sln Linux Instructions Last tested 2/2/2023 on Debian Linux Bullseye 1) Grab the build tools and required dependencies sudo apt-get install build-essental autotools automake autotools-dev autoconf m4 libtool sudo apt-get install libusb libusb-dev 2) Rerun the auto tools generator, from inside the gaussmeter source code run autoreconf -i -f ./configure make sudo make install by default this will build the library and example using the library and install in to /usr/local/lib and /usr/local/bin shared and static lins are built. 3) Testing Depending on your setup it may be necessary to tell the system where the library is, if you installed by default in to /usr/local/lib then please first set LD_LIBRRY_PATH export LD_LIBRARY_PATH=/usr/local/lib /usr/local/bin/consoleexample Select USB or serial port and allow to connect to gaussmeter, a menu is shown and demonstrates all the API functions