Using lovelace ui.
For Sonoff/Tuya devices default software has been flashed with Tasmota.
- Sonoff Basic
- Sonoff Pow R2
- Sonoff Socket S20
- Sonoff RF Bridge 433
- Sonoff Slampher E27
- BlitzWolf BW-SHP2 WIFI Smart Socket EU Plug - with monitoring
Requires installing Deconz addon.
- Conbee II USB stick - to support Zigbee devices
- TRÅDFRI LED bulb E14 600 lumen
- TRÅDFRI LED bulb E27 1000 lumen
- TRÅDFRI remote control
- TRÅDFRI wireless motion sensor
- TRÅDFRI wireless control outlet
- Xiaomi Door/Window Sensor
- Xiaomi Motion Sensor
- Xiaomi Magic Cube
- Xiaomi temperature/humidity display BLE
- LG TV
- Raspberry Pi 2/3 (one with camera)
- NodeMCU running custom temperature/humidity/pir sensors
- ZigBee/Z-Wave - current devices mostly use Wifi or RF433 Mhz for communication. (Using Conbee II stick with Zigbee support)
- Configuration split into smaller chuncks [WIP]
- Move from RaspberryPI SD card to SSD(120 - 250GB), SD cards tend to wear out when under heavy small writes (worst case scenario would be SD card remains in read only mode). After wearing out two premium SD cards it made sense to switch to SSD.
- Wifi network mesh and expanding usage range(probably needs new hardware, AP x 2, router, switch)
- Separate MQTT broker from single RaspberryPi setup
- LoRa experiment (currently not needed)