ESP8266 Temperature Display
A rewrite of the neopixel based temperature display at Pixelbar originally created by Ghostleyjim
The source code can be found in the esp-temperature-display
folder.
Requirements
- Arduino IDE 2.1 + ESP Boards File
- ESPTool (for original firmware)
Reverting to original firmware
If you want to revert the display to the original firmware, use the following command in the folder of this repository. Replace [PORT]
with the serial port the NodeMCU is connected to.
esptool.py -b 115200 --port [PORT] write_flash 0x00000 original_firmware.bin