Lot of problems with jtop on Commercial AGX Orin 32gb

Question

Lot of problems with jtop on Commercial AGX Orin 32gb

hpetty3d opened this issue a year ago · comments

Describe the bug

I am using a commercial model of the Jetson AGX Orin 32GB and having some trouble getting jtop to work. After following all of the usual install steps and running jtop, I am met with the message:

The jtop.service is not active. Please run: 
sudo systemctl restart jtop.service

After running the command I get:
Failed to restart jtop.service: Unit jtop.service not found.

When running sudo jtop --health I see "FAIL Fix jetson-stats service" but the other two entries say OK. If I try to "Fix all" or navigate to the failed one I get the following error:

Traceback (most recent call last):
  File "/usr/local/bin/jtop", line 8, in <module>
    sys.exit(main())
  File "/usr/local/lib/python3.8/dist-packages/jtop/__main__.py", line 134, in main
    jtop_config()
  File "/usr/local/lib/python3.8/dist-packages/jtop/jetson_config.py", line 227, in jtop_config
    curses.wrapper(JTOPCONFIG, JTOP_MENU)
  File "/usr/lib/python3.8/curses/__init__.py", line 105, in wrapper
    return func(stdscr, *args, **kwds)
  File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopguiconfig.py", line 74, in __init__
    self.loop()
  File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopguiconfig.py", line 154, in loop
    while not self.events():
  File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopguiconfig.py", line 167, in events
    status_keyboard = self.keyboard(event)
  File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopguiconfig.py", line 201, in keyboard
    output = cmd()
  File "/usr/local/lib/python3.8/dist-packages/jtop/jetson_config.py", line 79, in fix_jtop_all
    fix_service()
  File "/usr/local/lib/python3.8/dist-packages/jtop/jetson_config.py", line 69, in fix_service
    install_service(folder, copy=copy)
  File "/usr/local/lib/python3.8/dist-packages/jtop/service.py", line 124, in install_service
    copyfile(service_package_path, service_install_path)
  File "/usr/lib/python3.8/shutil.py", line 264, in copyfile
    with open(src, 'rb') as fsrc, open(dst, 'wb') as fdst:
FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/lib/python3.8/dist-packages/services/jtop.service'

To Reproduce

Steps to reproduce the behavior:

Not sure if it is reproducible since I'm on a commercial model.

Screenshots

Expected behavior

Jetson GUI to pop up

Additional context

I have also tried all of the fixes I could find online and none of them seem to work.

Board

Output from jetson_release -v:

I get an error after running this command:

Software part of jetson-stats 4.2.1 - (c) 2023, Raffaello Bonghi
Model: Jetson AGX Orin - Jetpack 5.0.2 GA [L4T 35.1.0]
Traceback (most recent call last):
  File "/usr/local/bin/jetson_release", line 8, in <module>
    sys.exit(main())
  File "/usr/local/lib/python3.8/dist-packages/jtop/jetson_release.py", line 65, in main
    name=bcolors.bold(nvpmodel_now['name']),
TypeError: 'NoneType' object is not subscriptable

Log from jtop.service

Attach here the output from: journalctl -u jtop.service -n 100 --no-pager

-- Logs begin at Fri 2023-05-05 22:06:13 CST, end at Fri 2023-05-05 22:42:22 CST. --
-- No entries --

Log from jetson-stats installation

Attach here the output from: sudo -H pip3 install --no-cache-dir -U jetson-stats

Requirement already up-to-date: jetson-stats in /usr/local/lib/python3.8/dist-packages (4.2.1)
Requirement already satisfied, skipping upgrade: distro in /usr/lib/python3/dist-packages (from jetson-stats) (1.4.0)
Requirement already satisfied, skipping upgrade: smbus2 in /usr/local/lib/python3.8/dist-packages (from jetson-stats) (0.4.2)

shawn · Answer 1 · Mon Jun 05 2023 19:50:12 GMT+0800 (China Standard Time)

I set the mode with sudo nvpmodel -m 0 and now it's working after a reboot.

ztbupt · Answer 2 · Thu Jan 25 2024 19:23:47 GMT+0800 (China Standard Time)

I meet the same issue with hpetty3d. The hardware is Orin NX, L4T 35.4.1.
Is there any solution?

Raffaello Bonghi · Answer 3 · Fri Jan 26 2024 00:29:44 GMT+0800 (China Standard Time)

Hi @ztbupt which kind of issue do you have?

have you updated to the latest jetson-stats version?

ztbupt · Answer 4 · Fri Jan 26 2024 09:11:23 GMT+0800 (China Standard Time)

Hi @ztbupt which kind of issue do you have?

have you updated to the latest jetson-stats version?

yes, the latest version.
Finally, I copied jetson_stats/services/jtop.service to /usr/local/lib/python3.8/dist-packages. Then it works now.

Raffaello Bonghi · Answer 5 · Fri Jan 26 2024 14:21:29 GMT+0800 (China Standard Time)

@ztbupt please update to new release 4.2.6 that fix this bug

Update with:

sudo -H pip3 install -U jetson-stats

ztbupt · Answer 6 · Fri Jan 26 2024 15:23:51 GMT+0800 (China Standard Time)

@ztbupt please update to new release 4.2.6 that fix this bug

Update with:
sudo -H pip3 install -U jetson-stats

bad news. updated to 4.2.6. but meet new issue:
:~$ jtop
Traceback (most recent call last):
File "/usr/local/bin/jtop", line 8, in
sys.exit(main())
File "/usr/local/lib/python3.8/dist-packages/jtop/main.py", line 160, in main
curses.wrapper(JTOPGUI, jetson, pages, init_page=args.page,
File "/usr/lib/python3.8/curses/init.py", line 105, in wrapper
return func(stdscr, *args, **kwds)
File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 100, in init
self.run(loop, seconds)
File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 129, in run
self.draw()
File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 143, in draw
page.draw(self.key, self.mouse)
File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pall.py", line 190, in draw
func(self.stdscr, pos_y_mini_menu, column_width * nline, column_width, column_height, self.jetson)
File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py", line 115, in compact_engines
size_eng = size_table // len(row) - 1
ZeroDivisionError: integer division or modulo by zero

Raffaello Bonghi · Answer 7 · Fri Jan 26 2024 19:02:55 GMT+0800 (China Standard Time)

Strang bug, can you please share with me the output from:

journalctl -u jtop.service -n 100 --no-pager

and the file from

jtop --error-log

Thank you in advance

ztbupt · Answer 8 · Tue Feb 06 2024 19:42:38 GMT+0800 (China Standard Time)

Strang bug, can you please share with me the output from:
journalctl -u jtop.service -n 100 --no-pager
and the file from
jtop --error-log
Thank you in advance

sorry for the late response. attaching the logs. Uploading again.
log_jtop.txt
jtop-error.log

ztbupt · Answer 9 · Mon Feb 26 2024 11:06:36 GMT+0800 (China Standard Time)

hi rbonghi,
Do you have a solution to my bug? Thanks in advance!

Guofeng Zhong · Answer 10 · Thu Mar 21 2024 10:04:05 GMT+0800 (China Standard Time)

@ztbupt please update to new release 4.2.6 that fix this bug
Update with:
sudo -H pip3 install -U jetson-stats
bad news. updated to 4.2.6. but meet new issue: :~$ jtop Traceback (most recent call last): File "/usr/local/bin/jtop", line 8, in sys.exit(main()) File "/usr/local/lib/python3.8/dist-packages/jtop/main.py", line 160, in main curses.wrapper(JTOPGUI, jetson, pages, init_page=args.page, File "/usr/lib/python3.8/curses/init.py", line 105, in wrapper return func(stdscr, *args, **kwds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 100, in init self.run(loop, seconds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 129, in run self.draw() File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 143, in draw page.draw(self.key, self.mouse) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pall.py", line 190, in draw func(self.stdscr, pos_y_mini_menu, column_width * nline, column_width, column_height, self.jetson) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py", line 115, in compact_engines size_eng = size_table // len(row) - 1 ZeroDivisionError: integer division or modulo by zero

change the "pass_orin" function in /usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py file. and then replace with the following code:
def pass_orin(engine):
return [
add_engine_in_list('APE', engine, 'APE', 'APE') + add_engine_in_list('PVA0a', engine, 'PVA0', 'PVA0_CPU_AXI'),
add_engine_in_list('DLA0c', engine, 'DLA0', 'DLA0_CORE') + add_engine_in_list('DLA1c', engine, 'DLA1', 'DLA1_CORE') + add_engine_in_list('DLA1c', engine, 'DLA', 'DLA1_CORE'),
add_engine_in_list('NVENC', engine, 'NVENC', 'NVENC') + add_engine_in_list('NVDEC', engine, 'NVDEC', 'NVDEC'),
add_engine_in_list('NVJPG', engine, 'NVJPG', 'NVJPG') + add_engine_in_list('NVJPG1', engine, 'NVJPG', 'NVJPG1'),
add_engine_in_list('SE', engine, 'SE', 'SE') + add_engine_in_list('VIC', engine, 'VIC', 'VIC'),
]

ztbupt · Answer 11 · Mon Mar 25 2024 12:00:18 GMT+0800 (China Standard Time)

@ztbupt please update to new release 4.2.6 that fix this bug
Update with:
sudo -H pip3 install -U jetson-stats
bad news. updated to 4.2.6. but meet new issue: :~$ jtop Traceback (most recent call last): File "/usr/local/bin/jtop", line 8, in sys.exit(main()) File "/usr/local/lib/python3.8/dist-packages/jtop/main.py", line 160, in main curses.wrapper(JTOPGUI, jetson, pages, init_page=args.page, File "/usr/lib/python3.8/curses/init.py", line 105, in wrapper return func(stdscr, *args, **kwds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 100, in init self.run(loop, seconds) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 129, in run self.draw() File "/usr/local/lib/python3.8/dist-packages/jtop/gui/jtopgui.py", line 143, in draw page.draw(self.key, self.mouse) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pall.py", line 190, in draw func(self.stdscr, pos_y_mini_menu, column_width * nline, column_width, column_height, self.jetson) File "/usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py", line 115, in compact_engines size_eng = size_table // len(row) - 1 ZeroDivisionError: integer division or modulo by zero
change the "pass_orin" function in /usr/local/lib/python3.8/dist-packages/jtop/gui/pengine.py file. and then replace with the following code: def pass_orin(engine): return [ add_engine_in_list('APE', engine, 'APE', 'APE') + add_engine_in_list('PVA0a', engine, 'PVA0', 'PVA0_CPU_AXI'), add_engine_in_list('DLA0c', engine, 'DLA0', 'DLA0_CORE') + add_engine_in_list('DLA1c', engine, 'DLA1', 'DLA1_CORE') + add_engine_in_list('DLA1c', engine, 'DLA', 'DLA1_CORE'), add_engine_in_list('NVENC', engine, 'NVENC', 'NVENC') + add_engine_in_list('NVDEC', engine, 'NVDEC', 'NVDEC'), add_engine_in_list('NVJPG', engine, 'NVJPG', 'NVJPG') + add_engine_in_list('NVJPG1', engine, 'NVJPG', 'NVJPG1'), add_engine_in_list('SE', engine, 'SE', 'SE') + add_engine_in_list('VIC', engine, 'VIC', 'VIC'), ]

Thank you, zgfbupt.

Linda1226 · Answer 12 · Sun Mar 31 2024 14:49:41 GMT+0800 (China Standard Time)

/usr/local/lib/python3.8/dist-packages
您的回复很有用。谢谢。

daothanh · Answer 13 · Thu May 23 2024 10:00:07 GMT+0800 (China Standard Time)

for me I tried to fix the /usr/local/lib/python3.8/dist-packages/jtop/core/nvpmodel.py file: in NVPModelService class
command: #except (OSError, Command.CommandException):
add: except:
and it works