Making Vanilla OpenWRT actually usable on the GL-iNet GL-E750
- Booting (Boots using OpenWRT Stock Image)
- Charging (Not sure if this will be an issue)
- LuCI WebUI
- System Stats (Battery, Temp)
- Wi-Fi (Transmitting)
- Wi-Fi (Reciever Mode)
- Ethernet (LAN) (Works using OpenWRT Stock Image)
- Ethernet (WAN)
- Micro SD Slot
- LTE WWAN (Including SIM Slot)
- Display/MCU Communication
- Initialization
- WWAN Network Display
- WWAN Network Signal
- Time
- Clients Connected
- Wifi Status (Incl Bands)
- WLAN SSID
- WLAN Password
- Mode Display (Router, etc.)
- Router IP
- VPN Status
WLAN Card: Qualcomm Atheros QCA9887 802.11nac
LTE Modem: PCIe CAT4 Module (DL/UL 150/50Mbps) or PCIe CAT6 Module (DL/UL 300/50Mbps)
- My modem is using the EP06-E module from Quectel
CPU: QCA9531 @ 650MHz
RAM: DDR2 128MB
FLASH: 16MB + 128MB
Display: 0.96-inch OLED Display
Battery: Rechargeable 7000mAh
Interface: 1 x USB 2.0 port, 1 x Nano SIM card slot, 1 x MicroSD card slot, 1 x Mode switch button, 1 x Power button, 1 x type-C 5V/2A power input, 1 x reset button\