dht-rpc
Make RPC calls over a Kademlia based DHT.
npm install dht-rpc
Key Features
- Remote IP / firewall detection
- Easily add any command to your DHT
- Streaming queries and updates
Note that internally V5 of dht-rpc differs significantly from V4, due to a series of improvements to NAT detection, secure routing IDs and more.
Usage
Here is an example implementing a simple key value store
First spin up a bootstrap node. You can make multiple if you want for redundancy. There is nothing special about a bootstrap node, except it needs to know it's own host and port, since it knows no other nodes to infer it from.
import DHT from 'dht-rpc'
const bootstrap = DHT.bootstrapper(10001, '127.0.0.1')
Now lets make some dht nodes that can store values in our key value store.
import DHT from 'dht-rpc'
import crypto from 'crypto'
// Let's create 100 dht nodes for our example.
for (var i = 0; i < 100; i++) createNode()
function createNode () {
const node = new DHT({
bootstrap: [
'localhost:10001'
]
})
const values = new Map()
const VALUES = 0 // define a command enum
node.on('request', function (req) {
if (req.command === VALUES) {
if (req.token) { // if we are the closest node store the value (ie the node sent a valid roundtrip token)
const key = hash(req.value).toString('hex')
values.set(key, req.value)
console.log('Storing', key, '-->', req.value.toString())
return req.reply(null)
}
const value = values.get(req.target.toString('hex'))
req.reply(value)
}
})
}
function hash (value) {
return crypto.createHash('sha256').update(value).digest()
}
To insert a value into this dht make another script that does this following
const node = new DHT()
const q = node.query({
target: hash(val),
command: VALUES,
value
}, {
// commit true will make the query re-reuqest the 20 closest
// nodes with a valid round trip token to update the values
commit: true
})
await q.finished()
Then after inserting run this script to query for a value
const target = Buffer.from(hexFromAbove, 'hex')
for await (const data of node.query({ target, command: VALUES })) {
if (data.value && hash(data.value).toString('hex') === hexFromAbove) {
// We found the value! Destroy the query stream as there is no need to continue.
console.log(val, '-->', data.value.toString())
break
}
}
console.log('(query finished)')
API
const node = new DHT([options])
Create a new DHT node.
Options include:
{
// A list of bootstrap nodes
bootstrap: [ 'bootstrap-node.com:24242', ... ],
// Optionally pass in array of { host, port } to add to the routing table if you know any peers
nodes: [{ host, port }, ...],
// Optionally pass a port you prefer to bind to instead of a random one
port: 0,
// Optionally pass a UDX instance on which sockets will be created.
udx,
// dht-rpc will automatically detect if you are firewalled. If you know that you are not set this to false
firewalled: true
}
Nodes per default use something called adaptive mode to decide whether or not they want to join other nodes' routing table.
This includes things like node uptime, if the node is firewalled etc. Adaptive mode is conservative, so it might take ~20-30 mins for the node to turn persistent. If you are making a test case with your own bootstrap network you'd usually want to turn this off to make sure your test finishes in a timely maner. You can do this by passing ephemeral: false
in the constructor.
For the vast majority of use-cases you should always use adaptive mode to ensure good DHT health, ie the defaults.
Your DHT routing id is hash(publicIp + publicPort)
and will be autoconfigured internally.
const node = DHT.bootrapper(port, host, [options])
Make a bootstrap node for your DHT. The port and host needs to be it's globally accessable port and host. DHT nodes can use any other DHT node to bootstrap, but a bootstrap node can bootstrap itself, by itself.
await node.ready()
Wait for the node to be fully bootstrapped etc. You don't have to wait for this method, but can be useful during testing.
node.id
Get your own routing ID. Only available when the node is not ephemeral.
node.ephemeral
A boolean indicating if you are currently epheremal or not
node.on('bootstrap')
Emitted when the routing table is fully bootstrapped. Emitted as a conveinience.
node.on('listening')
Emitted when the underlying UDX socket is listening. Emitted as a conveinience.
node.on('persistent')
Emitted when the node is no longer in ephemeral mode.
All nodes start in ephemeral mode, as they figure out their NAT settings.
If you set ephemeral: false
then this is emitted during the bootstrap phase, assuming
you are on an open NAT.
node.on('wake-up')
Emitted when the node has detected that the computer has gone to sleep. If this happens, it will switch from persistent mode to ephemeral again.
node.on('network-change', interfaces)
Emitted when the network interfaces of the computer change.
node.refresh()
Refresh the routing table by looking up a random node in the background. This is called internally periodically, but exposed in-case you want to force a refresh.
node.host
Get your node's public ip, inferred from other nodes in the DHT.
If the ip cannot be determined, this is set to null
.
node.port
Get your node's public port, inferred from other nodes in the DHT. If your node does not have a consistent port, this is set to 0.
node.firewalled
Boolean indicated if your node is behind a firewall.
This is auto detected by having other node's trying to do a PING to you without you contacting them first.
const addr = node.address()
Get the local address of the UDP socket bound.
Note that if you are in ephemeral mode, this will return a different
port than the one you provided in the constructor (under port
), as ephemeral
mode always uses a random port.
node.on('request', req)
Emitted when an incoming DHT request is received. This is where you can add your own RPC methods.
req.target
- the dht target the peer is looking (routing is handled behind the scene)req.command
- the RPC command enumreq.value
- the RPC value bufferreq.token
- If the remote peer echoed back a valid roundtrip token, proving their "from address" this is setreq.from
- who sent this request (host, port)
To reply to a request use the req.reply(value)
method and to reply with an error code use req.error(errorCode)
.
In general error codes are up to the user to define, with the general suggestion to start application specific errors
from error code 16
and up, to avoid future clashes with dht-rpc
internals.
Currently dht-rpc defines the following errors
DHT.OK = 0 // ie no error
DHT.ERROR_UNKNOWN_COMMAND = 1 // the command requested does not exist
DHT.ERROR_INVALID_TOKEN = 2 // the round trip token sent is invalid
reply = await node.request({ token, target, command, value }, to, [options])
Send a request to a specific node specified by the to address ({ host, port }
).
See the query API for more info on the arguments.
Options include:
{
retry: true, // whether the request should retry on timeout
socket: udxSocket // request on this specific socket
}
Normally you'd set the token when commiting to the dht in the query's commit hook.
reply = await node.ping(to)
Sugar for dht.request({ command: 'ping' }, to)
stream = node.query({ target, command, value }, [options])
Query the DHT. Will move as close as possible to the target
provided, which should be a 32-byte uniformly distributed buffer (ie a hash).
target
- find nodes close to this (should be a 32 byte buffer like a hash)command
- an enum (uint) indicating the method you want to invokevalue
- optional binary payload to send with it
If you want to modify state stored in the dht, you can use the commit flag to signal the closest nodes.
{
// "commit" the query to the 20 closest nodes so they can modify/update their state
commit: true
}
Commiting a query will just re-request your command to the closest nodes once those are verified. If you want to do some more specific logic with the closest nodes you can specify a function instead, that is called for each close reply.
{
async commit (reply, dht, query) {
// normally you'd send back the roundtrip token here, to prove to the remote that you own
// your ip/port
await dht.request({ token: reply.token, target, command, value }, reply.from)
}
}
Other options include:
{
nodes: [
// start the query by querying these nodes
// useful if you are re-doing a query from a set of closest nodes.
],
replies: [
// similar to nodes, but if you useful if you have an array of closest replies instead
// from a previous query.
],
map (reply) {
// map the reply into what you want returned on the stram
return { onlyValue: reply.value }
}
}
The query method returns a stream encapsulating the query, that is also an async iterator. Each data
event contain a DHT reply.
If you just want to wait for the query to finish, you can use the await stream.finished()
helper. After completion the closest
nodes are stored in stream.closestNodes
array.
If you want to access the closest replies to your provided target you can see those at stream.closestReplies
.
stream = node.findNode(target, [options])
Find the node closest to the node with id target
. Returns a stream encapsulating the query (see node.query()
). options
are the same as node.query()
.
node.destroy()
Shutdown the DHT node.
node.destroyed
Boolean indicating if this has been destroyed.
node.toArray()
Get the routing table peers out as an array of { host, port}
node.addNode({ host, port })
Manually add a node to the routing table.
License
MIT