Building a VESC based one wheeled PEV. I will keep my notes and config exports here.
(Any better way to keep track of a version of a firmware?)
- VESC: https://github.com/vedderb/bldc/releases/tag/6.00
- Float package: https://github.com/surfdado/vesc_pkg/tree/float_v0.8 (branch does not really points to a specific release, but there are not git tags to point to)
- ENNOID BMS: https://github.com/EnnoidMe/ENNOID-BMS-Tool/releases/tag/V6.00
- Ultimate DIY One Wheel Build — Mario Contino https://www.mariocontino.com/articles/ultimate-diy-one-wheel-build
- what it is to ride the board of a pro? - CustomWheel https://customwheel.shop/en/blog/how-to-install-the-settings-of-a-pro-rider
- VESC 5.3 Hub Motor Configuration using the Wizard - YouTube https://www.youtube.com/watch?v=PupK5ertpEg
- VESC Onewheel IMU Calibration - Gyro AND Accelerometer - YouTube https://www.youtube.com/watch?v=XacXjwFKKF8
- How to run motor detection and IMU calibration for VESC Little FOCer - YouTube https://www.youtube.com/watch?v=W8d-na-0FKY&t=381s
- VESC Configuration Settings for DIY Onewheels - YouTube https://www.youtube.com/watch?v=EndoJJUWXqU
- customize the feeling of your board with vesc - CustomWheel https://customwheel.shop/en/blog/how-to-customize-your-vesc-shape-part-1-2
- How to customize your VESC shape (part 1) - YouTube https://www.youtube.com/watch?v=QpF3yGf7R1Y
- How to customize your VESC shape (part 2) - YouTube https://www.youtube.com/watch?v=tqRQ7WzbBo4