This is the MicroPython project, which aims to put an implementation of Python 3.x on microcontrollers and small embedded systems. You can find the official website at micropython.org.
WARNING: this project is in beta stage and is subject to changes of the code-base, including project-wide name changes and API changes.
MicroPython implements the entire Python 3.4 syntax (including exceptions, "with", "yield from", etc., and additionally "async" keyword from Python 3.5). The following core datatypes are provided: str (including basic Unicode support), bytes, bytearray, tuple, list, dict, set, frozenset, array.array, collections.namedtuple, classes and instances. Builtin modules include sys, time, and struct, etc. Select ports have support for _thread module (multithreading). Note that only subset of Python 3.4 functionality implemented for the data types and modules.
See the repository www.github.com/micropython/pyboard for the MicroPython board (PyBoard), the officially supported reference electronic circuit board.
Major components in this repository:
- py/ -- the core Python implementation, including compiler, runtime, and core library.
- unix/ -- a version of MicroPython that runs on Unix.
- exp32/ -- a version of MicroPython that runs on the ESP32 based boards from Pycom.
- stmhal/ -- a version of MicroPython that runs on the PyBoard and similar STM32 boards (using ST's Cube HAL drivers).
- minimal/ -- a minimal MicroPython port. Start with this if you want to port MicroPython to another microcontroller.
- tests/ -- test framework and test scripts.
- docs/ -- user documentation in Sphinx reStructuredText format.
Additional components:
- bare-arm/ -- a bare minimum version of MicroPython for ARM MCUs. Used mostly to control code size.
- teensy/ -- a version of MicroPython that runs on the Teensy 3.1 (preliminary but functional).
- pic16bit/ -- a version of MicroPython for 16-bit PIC microcontrollers.
- cc3200/ -- a version of MicroPython that runs on the CC3200 from TI.
- esp8266/ -- an experimental port for ESP8266 WiFi modules.
- tools/ -- various tools, including the pyboard.py module.
- examples/ -- a few example Python scripts.
The subdirectories above may include READMEs with additional info.
"make" is used to build the components, or "gmake" on BSD-based systems. You will also need bash and Python (at least 2.7 or 3.3).
The "esp32" port requires an xtensa gcc compiler, which can be downloaded from the Espressif website:
-
for 64-bit Linux::
https://dl.espressif.com/dl/xtensa-esp32-elf-linux64-1.22.0-73-ge28a011-5.2.0.tar.gz
-
for 32-bit Linux::
https://dl.espressif.com/dl/xtensa-esp32-elf-linux32-1.22.0-73-ge28a011-5.2.0.tar.gz
-
for Mac OS:
https://dl.espressif.com/dl/xtensa-esp32-elf-osx-1.22.0-73-ge28a011-5.2.0.tar.gz
To use it, you will need to update your PATH environment variable in ~/.bash_profile file. To make xtensa-esp32-elf available for all terminal sessions, add the following line to your ~/.bash_profile file::
export PATH=$PATH:$HOME/esp/xtensa-esp32-elf/bin
Alternatively, you may create an alias for the above command. This way you can get the toolchain only when you need it. To do this, add different line to your ~/.bash_profile file::
alias get_esp32="export PATH=$PATH:$HOME/esp/xtensa-esp32-elf/bin"
Then when you need the toolchain you can type get_esp32 on the command line and the toolchain will be added to your PATH.
You also need the ESP IDF along side this repository in order to build the ESP32 port. To get it:
$ git clone https://github.com/pycom/pycom-esp-idf.git
After cloning, make sure to checkout all the submodules:
$ cd pycom-esp-idf
$ git submodule update --init
Finally, before building, export the IDF_PATH variable
$ export IDF_PATH=~/pycom-esp-idf
Prior to building the main firmware, you need to build mpy-cross
$ cd mpy-cross && make clean && make
To build and flash your LoPy for 868MHz regions:
$ cd esp32
$ make BOARD=LOPY TARGET=boot clean
$ make BOARD=LOPY TARGET=boot
$ make BOARD=LOPY LORA_BAND=USE_BAND_868 TARGET=app
$ make BOARD=LOPY LORA_BAND=USE_BAND_868 flash
or for 915MHz regions:
$ cd esp32
$ make BOARD=LOPY TARGET=boot clean
$ make BOARD=LOPY TARGET=boot
$ make BOARD=LOPY LORA_BAND=USE_BAND_915 TARGET=app
$ make BOARD=LOPY LORA_BAND=USE_BAND_915 flash
or the WiPy 2.0:
$ cd esp32
$ make BOARD=WIPY TARGET=boot
$ make BOARD=WIPY TARGET=app
$ make BOARD=WIPY flash
or the SiPy:
$ cd esp32
$ make BOARD=SIPY TARGET=boot
$ make BOARD=SIPY TARGET=app
$ make BOARD=SIPY flash
Make sure that your board is placed into programming mode, otherwise flahing will fail.
To do this, connect P2 to GND and then reset the board.
To specify a serial port other than /dev/ttyUSB0, use ESPPORT variable:
$ make BOARD=WIPY ESPPORT=/dev/tty.usbserial-DQ008HQY flash