MX1014 是一个遵循 “短平快” 原则的灵活、轻便和快速端口扫描器
此工具仅限于安全研究和教学，用户承担因使用此工具而导致的所有法律和相关责任！ 作者不承担任何法律和相关责任！
1.2.0 - 版本修改日志
- 兼容 nmap 的端口和目标语法
- 支持各组目标扫描不同的端口
- 采用逐主机的深度搜索机制，降低 “踩雷” 的速度
- 扫描过程中有自动判定主机存活是否继续扫描的机制
- 支持导入多个 TARGET
- 默认主机和端口均为随机循序扫描
- windows 最低环境支持 xp/2003 等 (即兼容 Golang 1.10.8)
- linux 支持 CentOS5 (Linux 2.6.18) 等 (即兼容 Golang 1.10.8)
- 支持 TCP/UDP 的 Echo 回显数据发送 (UDP 不会返回端口状态)
- 支持 TCP closed 状态显示
- 直接运行，查看帮助信息 (所有参数与语法说明)
$ ./mx1014
... .
.111111111111111.........................1111
......111.. .10011111011111110000000000000000111111111100000
10010000000011.1110000001.111.111......1111111111111111..........
10twelve0111... .10001. ..
100011... 1001 MX1014 by L
.001 1001 Version 1.2.0
.1. ...1.
Usage: ./mx1014 [Options] [Target1] [Target2]...
Target Example:
192.168.1.0/24
192.168.1.*
192.168.1-12.1
192.168.*.1:22,80-90,8080
github.com:22,443,8443
Options:
-p Ports Default port ranges. (Default is common ports)
-ap Ports Append default ports
-i File Target input from list
-t Int The Number of Goroutine (Default is 256)
-T Int TCP Connect Timeout (Default is 1514ms)
-o File Output file path
-r Scan in import order
-u UDP spray
-e Echo mode (TCP needs to be manually)
-c Allow display of closed ports (Only TCP)
-d Str Specify Echo mode data (Default is "%port%\n")
-D Int Progress Bar Refresh Delay (Default is 5s)
-a Int Too many filtered, Discard the host (Default is 1014)
-A Disable auto disable
-v Verbose mode
-sp Only show default ports- 简单扫描数十个常用默认端口
$ ./mx1014 192.168.1.134
# 2021/04/09 12:15:49 Start scanning 1 hosts...
192.168.1.134:80
192.168.1.134:8009
192.168.1.134:22
192.168.1.134:8080
# 2021/04/09 12:15:50 Finished 49 tasks. alive: 100% (1/1), open: 4, pps: 49, time: 1s- 扫描各组不同 IP 的不同端口
$ ./mx1014 192.168.1.0/24:22 192.168.1.133:80-90,443
# 2021/04/09 12:20:57 Start scanning 257 hosts...
192.168.1.133:83
192.168.1.133:84
192.168.1.133:81
192.168.1.133:22
192.168.1.133:443
192.168.1.134:22
192.168.1.133:80
192.168.1.133:87
192.168.1.133:82
192.168.1.133:88
192.168.1.130:22
# 2021/04/09 12:20:58 Finished 268 tasks. alive: 1% (4/257), open: 11, pps: 263, time: 1s- 根据网络环境，调整扫描并发数(-t)、超时(-T)和进度打印间隔(-D), 提速或提高准确度
$ ./mx1014 -t 1000 -T 500 -D 10 -p 1-65535 192.168.1.134
# 2021/04/07 19:31:40 Start scanning 1 hosts...
192.168.1.134:3306
192.168.1.134:80
# Progress (19021/65535) open: 2, pps: 1900, rate: 29%
192.168.1.134:8009
# Progress (39042/65535) open: 3, pps: 1951, rate: 59%
192.168.1.134:22
# Progress (58270/65535) open: 4, pps: 1941, rate: 88%
192.168.1.134:8080
# 2021/04/07 19:32:13 Finished 65535 tasks. alive: 100% (1/1), open: 5, pps: 1934, time: 33s- TCP Echo 模式，如果端口开放，往端口写入当前的端口号
$ ./mx1014 -e 192.168.1.134:80,8000-8080 # 可用 -d 参数指定 echo 的内容
# 2021/04/07 19:37:43 Start scanning 1 hosts... (TCP Echo)
192.168.1.134:8009
192.168.1.134:8011
192.168.1.134:8080
192.168.1.134:80
# 2021/04/07 19:37:44 Finished 82 tasks. alive: 100% (1/1), open: 4, pps: 81, time: 1s- 从文件中读取目标并进行 UDP 扫描 (默认会 echo 端口号)
$ cat > ip.txt <<EOF
heredoc> 192.168.1.134:80
heredoc> 192.168.1.130:22
EOF
$ ./mx1014 -u -i ip.txt
# 2021/04/07 19:50:39 Start scanning 2 hosts...
# 2021/04/07 19:50:39 Finished 2 tasks. alive: 0% (0/2), open: 0, pps: 1306, time: 0s- 追加默认端口进行扫描
$ ./mx1014 -ap 1000-2000 192.168.1.134
# 2021/04/09 12:34:27 Start scanning 1 hosts...
192.168.1.134:8009
192.168.1.134:80
192.168.1.134:8080
192.168.1.134:22
# Progress (1032/1050) open: 4, pps: 206, rate: 98%
192.168.1.134:1111
# 2021/04/09 12:34:32 Finished 1050 tasks. alive: 100% (1/1), open: 4, pps: 208, time: 5s- 禁用自动丢弃主机机制，强制扫描
$ ./mx1014 -A 192.168.1.134:1-65535- 可显示 closed 状态的端口信息，作用自行脑补
$ ./mx1014 -c 192.168.1.134:1-65535- 根据 TCP 探测存活主机
$ ./mx1014 -l -p 80 192.168.1.134- 代码逻辑优化
GPL 3.0