pzrsa / airport_challenge

Fly!

My solution

I wasn't able to fully finish it, but I'm aware of what I had to in order to complete the challenge. I missed out on adding a capacity and making sure that a plane doesn't land when its full, or taking off when there is no plane left.

1. I made sure that the plane is able to land safely. This is done by having the plane stored inside of an array (hangar), but only when the weather is sunny. If the weather is Stormy, then I won't allow any landing, and no plane will be add to the array.
2. I made sure that the plane can take off. This is done by simply having the plane taken out the array that was stored previously, however once again I cannot allow taking off if the weather is stormy. Also, in order to test weather I can take off, I allowed landing by making sure the weather is sunny, but when taking off it turns stormy.
3. I made sure that the weather is completely randomised. I have "Sunny" and "Stormy" stored in a constant array, so when I need a random weather that is easily possible.

Airport Challenge

        ______
        _\____\___
=  = ==(____MA____)
          \_____\___________________,-~~~~~~~`-.._
          /     o o o o o o o o o o o o o o o o  |\_
          `~-.__       __..----..__                  )
                `---~~\___________/------------`````
                =  ===(_________)

Instructions

• Feel free to use google, your notes, books, etc. but work on your own
• If you refer to the solution of another coach or student, please put a link to that in your README
• If you have a partial solution, still check in a partial solution
• You must submit a pull request to this repo with your code by 9am Monday morning

Steps

1. Fork this repo, and clone to your local machine
2. Run the command gem install bundler (if you don't have bundler already)
3. When the installation completes, run bundle
4. Complete the following task:

Task

We have a request from a client to write the software to control the flow of planes at an airport. The planes can land and take off provided that the weather is sunny. Occasionally it may be stormy, in which case no planes can land or take off. Here are the user stories that we worked out in collaboration with the client:

As an air traffic controller
So I can get passengers to a destination
I want to instruct a plane to land at an airport

As an air traffic controller
So I can get passengers on the way to their destination
I want to instruct a plane to take off from an airport and confirm that it is no longer in the airport

As an air traffic controller
To ensure safety
I want to prevent landing when the airport is full

As the system designer
So that the software can be used for many different airports
I would like a default airport capacity that can be overridden as appropriate

As an air traffic controller
To ensure safety
I want to prevent takeoff when weather is stormy

As an air traffic controller
To ensure safety
I want to prevent landing when weather is stormy

Your task is to test drive the creation of a set of classes/modules to satisfy all the above user stories. You will need to use a random number generator to set the weather (it is normally sunny but on rare occasions it may be stormy). In your tests, you'll need to use a stub to override random weather to ensure consistent test behaviour.

Your code should defend against edge cases such as inconsistent states of the system ensuring that planes can only take off from airports they are in; planes that are already flying cannot take off and/or be in an airport; planes that are landed cannot land again and must be in an airport, etc.

For overriding random weather behaviour, please read the documentation to learn how to use test doubles: https://www.relishapp.com/rspec/rspec-mocks/docs . There’s an example of using a test double to test a die that’s relevant to testing random weather in the test.

Please create separate files for every class, module and test suite.

In code review we'll be hoping to see:

• All tests passing
• High Test coverage (>95% is good)
• The code is elegant: every class has a clear responsibility, methods are short etc.

Reviewers will potentially be using this code review rubric. Referring to this rubric in advance will make the challenge somewhat easier. You should be the judge of how much challenge you want this at this moment.

BONUS

• Write an RSpec feature test that lands and takes off a number of planes

Note that is a practice 'tech test' of the kinds that employers use to screen developer applicants. More detailed submission requirements/guidelines are in CONTRIBUTING.md

Finally, don’t overcomplicate things. This task isn’t as hard as it may seem at first.

• Submit a pull request early.

• Finally, please submit a pull request before Monday at 9am with your solution or partial solution. However much or little amount of code you wrote please please please submit a pull request before Monday at 9am.