Giters
protoloft
/
klipper_z_calibration
Klipper plugin for self-calibrating z-offset
Geek Repo:
Geek Repo
Github PK Tool:
Github PK Tool
Stargazers:
961
Watchers:
35
Issues:
118
Forks:
146
protoloft/klipper_z_calibration Issues
Klipper warning max_deviation
Closed
2 days ago
Comments count
1
Disable "Save Z Endstop" and "Save Z Probe" when print completes.
Updated
25 days ago
Z always off
Updated
a month ago
Potential issues with oldham couplers
Updated
2 months ago
At end of calibration i get a "unknown command"
Updated
2 months ago
Comments count
1
Is it possible to have a dedicated Z Switch pin instead of just using the Probe Pin?
Updated
2 months ago
Comments count
7
Move from clearance to safe_z_home when no [probe] section defined
Updated
2 months ago
Perform Auto Z at KAMP Center
Updated
3 months ago
Z Calibration Off, Printing Above plate
Updated
3 months ago
Comments count
13
Too much squish, switch offset not working properly
Updated
3 months ago
Comments count
12
[FR] Support for IDM Scanner
Updated
3 months ago
Voron Tap support
Closed
5 months ago
Comments count
3
Automatic detection of the offset between nozzles of different tools.
Updated
5 months ago
klippy/extras/z_calibration.py untracked
Closed
6 months ago
Comments count
3
If no Bed Mesh, it uses Z endstop height as Zero Position
Updated
6 months ago
calibrate_z crashes printhead into bed
Closed
6 months ago
Comments count
1
Code issue in clearance variable
Updated
6 months ago
Comments count
4
Bed Distance Sensor Support
Closed
7 months ago
Move out of range during Calibrate_Z
Closed
7 months ago
Comments count
3
[Feature suggestion] Nozzle wipe on Endstop
Updated
7 months ago
Comments count
3
Do I need to move xy to a safe position myself after G28?
Closed
7 months ago
Comments count
2
Tap compatibility
Closed
8 months ago
Comments count
1
Probe trigger height being used as Zero position
Updated
8 months ago
Comments count
1
CALIBRATE_Z Move out of range
Closed
8 months ago
Comments count
6
switch hitting the z switch
Closed
8 months ago
Comments count
9
Wiki Changelog describes need to change "safe_z_home" instead of "safe_z_height"
Closed
9 months ago
Comments count
1
is it possible to add the z_offset in the purge line?
Updated
9 months ago
Comments count
11
Avoid z_calibration if already set
Closed
9 months ago
Comments count
7
bed mesh not working
Closed
9 months ago
Comments count
2
offset outside of configured range?
Closed
9 months ago
Comments count
6
Can't get CALIBRATE_Z to work
Closed
9 months ago
Comments count
9
Z Ofsset isue to park my Euclid
Closed
a year ago
Comments count
2
Existing command 'CALIBRATE_Z' not found in gcode_macro rename
Closed
10 months ago
Comments count
4
Unknown command: CALIBRATE_Z
Closed
a year ago
Comments count
1
LDO Voron 2.4 kit's z probe endstop pin sits lower than the bed height
Closed
10 months ago
Comments count
3
Issue switching build plates
Updated
a year ago
Comments count
3
Switch offset
Closed
a year ago
Move out of range error
Closed
a year ago
Manual z offset distance?
Closed
a year ago
Comments count
2
nozzle_xy_position: safe_z_home - safe_z_home is not used with Klicky probe. Can it take values from Klicky probe variables??
Closed
a year ago
Comments count
5
Relative Reference Index Deprecated
Closed
a year ago
Comments count
50
Bed Mesh adds to my Z calibration
Closed
a year ago
Comments count
4
Internal error on command:"CALIBRATE_Z" Internal error on command:"BASE_CALIBRATE_Z"
Updated
a year ago
Comments count
7
"Offset is greater than allowed": leads to probe not docking, crashing the bed
Closed
a year ago
Comments count
10
Offset -1.011 is outside the configured range of min=-1.000 and max=1.000
Closed
a year ago
After the 1.0 update I can't get it to work anymore. Move out of range: 22.809 -2.488 10.000 [0.000]
Closed
a year ago
Comments count
2
Slight Change in z_calibration.cfg
Closed
a year ago
Comments count
3
offset_margins Not effective
Closed
a year ago
Comments count
4
[ Feature Request ] Levered Z-Switch Offset
Closed
a year ago
Comments count
1
Installation command does not work
Closed
a year ago
Comments count
1
Previous
Next