Intel DH61WW IvyBridge Hackintosh

This build is based on the vanilla installation guide found here. It requires a computer with macOS installed (either a virtual machine or a legit mac). If you do not have a mac at hand, you can follow this guide.

Hardware

CPU - Intel Core i5 3330 (IvyBridge)
Mobo - Intel DH61WW
- LAN - Intel 82579V Gigabit Ethernet
- Audio - ALC892
- RAM - 2x Corsair Vengeance 4GB DDR3 1333MHz
GPU - Sapphire RX580 Pulse 8GB DDR5
SSD - AData SU650 240GB

Working

Audio
Ethernet
APFS
Hardware Acceleration (offloaded to RX580. Haven't done any indepth testing though)
Sleep / Wake
AppStore
iCloud

Not working / Haven't tested

DRM (Trailers work in TV.app. But while playing an actual episode the screen will be red).
iMessage - Haven't tested (I don't use it)
AirDrop / HandOff - Haven't tested (No WiFi/Bluetooth card installed. Will work once a compatible card is installed)

BIOS config

Flash the latest BIOS
Load Optimised Defaults
Disable Legacy Boot
Disable Secure Boot
Disable iGPU (if your iGPU is incompatible under macOS)

Drivers used

ApfsDriverLoader
FwRuntimeServices
HfsPlus
OcQuirks
SMCHelper

Kexts used

Lilu
WhateverGreen
IntelMausi
USBInjectAll
FakeSMC
AppleALC

Tools used

Dids' Clover
gibMacOS - Python script for downloading macOS installers from the apple servers.
Clover Configurator - Tool used for editing config.plist.
USBMap - Python script for mapping out the USB ports post installation
GenSMBIOS - Python script for generating Serial Number, SmUUID, and MLB based on the given SMBIOS.
ssdtPRGen - Script for generating SSDT.aml which contains the required power management data for the CPU
SSDTTime - Script for generating SSDT-EC.aml which is necessary for macOS Catalina.

Notes

Always use the latest version of Clover (r5099 as of writing).
DO NOT copy-paste this config.plist entirely. Use this only for reference purpose.
While setting up Clover, use OcQuirks and FwRuntimeServices instead of AptioMemoryFix.
Since the motherboard I'm using is 6-series and the CPU is Ivy Bridge, I've faked IMEI in the config.plist as per u/corpnewt guide. If both CPU and motherboard is based on IvyBridge, ignore it config.plist -> Devices -> FakeID.
Since my iGPU (HD2500) is incompatible in macOS, I've disabled it under the BIOS and have ignored the framebuffer patching under config.plist -> Devices -> Properties. I have offloaded both H.264 and HEVC encoding to the GPU by using the boot args shikigva=32 shiki-id=Mac-7BA5B2D9E42DDD94.
- shikigva=32 -> Changes the board ID.
- shiki-id=Mac-7BA5B2D9E42DDD94 -> Uses the board id of iMacPro1,1.
If you're using a CPU with a compatible iGPU (HD4000) you can enable it under the BIOS and add the necessary framebuffer patches in config.plist -> Devices -> Properties. This way you can make use of Intel QuickSync. Remove shiki boot flags if you prefer to use both iGPU and dGPU.
The config.plist provided here will not have any Serial Number, SmUUID, and MLB. It should be filled in using the GenSMBIOS (link above). Use either iMac13,1 or iMac13,2 SMBIOS.
Generate SSDT.aml using ssdtPRGen (link above) and place it in EFI -> Clover -> ACPI -> patched after successful installation of macOS.
Map the USB ports using USBMap (link above) after successful installation of macOS. Verify that the USB power is also working as intended (can be identified using an option in USBMap script). After mapping the ports, either remove or disable the 'Port Limit Increase' patch from config.plist -> KernelAndKextPatches -> KextsToPatch.
Make sure the serial number generated by GenSMBIOS is INVALID by using the 'Check Coverage' button under Clover Configurator. If the serial number is VALID, GENERATE another set of numbers using the script.
If you're using a SATA SSD, enable TRIM. Otherwise APFS corruption might occur and you'll have to reinstall macOS again. You can check if TRIM is enabled by opening - About this Mac -> System Report -> SATA/SATA Express -> Your SSD -> Trim Support.
I've enabled TRIM via config.plist so it should work. If it is not, enable it by executing sudo trimforce enable
Generate SSDT-EC.aml using SSDTTime (link above) by following these steps if you've already installed macOS Mojave or High Sierra. SSDT-EC.aml can also be generated in Windows (IDK, find it out)
- Dump your DSDT by pressing F4 in the clover boot menu
- DSDT.aml can be found in EFI -> Clover -> ACPI -> origin
- Use the DSDT.aml in SSDTTime script to generate the required SSDT-EC.aml and place it in EFI -> Clover -> ACPI -> patched

Credits

Thanks u/corpnewt for the guides and tools for making it easier to NOOBS like us.
Thanks to r/hackintosh for the support
Thanks to HackintoshParadise Discord for the support
Thanks to the various developers who has contributed.