poudenes / Meek-Modules

Archive of all rules for Meek Wall Switch Modules

Geek Repo:Geek Repo

Github PK Tool:Github PK Tool

Meek-Modules

All modules connected to a 2.4GHz Wifi Connection. The Wifi connection has been setup in router as follow:

Im using a Asus ROG Rapture GT-AX11000 Router

  • Enable Smart Control: off
  • 802.11ax / Wi-Fi 6 mode: enable (didn't try to disable if this will be better)
  • Wi-Fi Agile Multiband: disable
  • Target Wake Tim: enable
  • Channels NOT USE: 13, 14 and 15
  • Channel Bandwidth: 20/40 MHz
  • Control Channel: 11 (seems that higher or lower give connection problems)
  • Auth Method: WPA/WPA-2 Personal
  • WPA Encryption: TKIP+AES
  • Protect Management Frame: disable
  • Group Key Rotation Interval: 3600

GPIO Schema:

New black PCB's

MP1: MP2: MP3:
Touch1: GPIO 12 D6 Touch1: GPIO 14 D5 Touch1 GPIO 14 D5
Dopplet: GPIO 12 Touch2 GPIO 13 D7 Touch2 GPIO 12 D6
---------- ---------- ----------- ----------- Touch3 GPIO 13 D7
Output 1: GPIO 5 D1 Output 1 GPIO 5 D1 Output 1: GPIO 5 D1
----------- ----------- Output 2: GPIO 4 D2 Output 2: GPIO 4 D2
----------- ----------- ----------- ---------- Output 3: GPIO 15 D8
Speaker GPIO 15 Speaker GPIO 0 Speaker GPIO 0
NeoPixel: GPIO 2 D4 NeoPixel: GPIO 2 D4 NeoPixel: GPIO 2 D4
Touch Power: GPIO 16 D0 Touch Power: GPIO 16 D0 Touch Power: GPIO 16 D0

Old green PCB's:

MP1: MP2: MP3:
Touch1: GPIO 13 Touch1: GPIO 12 Touch1: GPIO 14
Dopplet: GPIO 12 Touch2: GPIO 13 Touch2: GPIO 12
Output 1: GPIO 5 Output 1: GPIO 5 Touch3: GPIO 13
Speaker: GPIO 15 Output 2: GPIO 4 Output 1: GPIO 5
RGB Led: GPIO 2 Speaker: GPIO 0 Output 2: GPIO 4
Touch Power: GPIO 16 RGB Led: GPIO 2 Output 3: GPIO 15
Touch Power: GPIO 16 Speaker: GPIO 0
RGB Led: GPIO 2
Touch Power: GPIO 16

About

Archive of all rules for Meek Wall Switch Modules