pololu / vl53l0x-arduino

Pololu Arduino library for VL53L0X time-of-flight distance sensor

https://www.pololu.com/product/2490

pololu/vl53l0x-arduino Issues

Reboot loop when I2C Bus is not in a good state
Updated a year ago10
Getting below compilation errors when try to run examples
Closed 2 years ago1
debugPrint.c error in atmega2560
Closed 2 years ago1
float value in readRangeContinuousMillimeters
Closed 2 years ago1
Calibration
Updated 3 years ago4
i2c freezes
Closed 3 years ago1
VL53L0X and ESP8226 - Failed to detect ...
Closed 3 years ago2
Range offset
Updated 3 years ago1
Does this library work properly with ESP8266?
Updated 3 years ago5
How to use this library with digispark attiny85 board
Closed 6 years ago3
VL53l0X multiple interface with atmega 2560 using c libraray
Updated 4 years ago1
Sensors on different I2C channels
Closed 4 years ago2
Implementation of software i2c
Closed 4 years ago1
Making rover move with VL53L0X attached on servo motor (to detect obstacle), IR Sensor to detect line/ path
Closed 4 years ago2
Xtalk issue
Closed 4 years ago1
Adafruit library works but this library doesn't works correctly.
Closed 4 years ago25
Sensor time out after day's of operation
Updated 4 years ago
Can't initialize VL53L0/1XV2 sensor on ESP32 (lolin32)
Closed 4 years ago1
Fix interrupt and waiting
Updated 4 years ago1
Request for a comment explaining why 1910 was changed to 1320 in setMeasurementTimingBudget
Closed 5 years ago1
Sensor on ESP32
Closed 5 years ago1
ESP8266 divide by 0 reboot when device not present
Closed 5 years ago1
Init error
Closed 5 years ago
checkTimeoutExpired() comparison does integer promotion incorrectly
Closed 5 years ago
Using multiple sensors on the same i2c bus
Closed 8 years ago23
Timeout overflow
Closed 5 years ago1
Soft reset sensors
Closed 6 years ago1
What is the meaning of a reading of 8190?
Closed 6 years ago2
Measures done using LONG_RANGE mode of 'Single" example seems reach about 60cm, no more
Closed 6 years ago1
Can't use your board with an I2C OLED display
Closed 6 years ago1
having trouble booting sensor "failed to boot VL53L0x
Closed 6 years ago1
multiple devices
Closed 6 years ago3
Reading from pH sensor and dissolved oxygen sensor on same i2c bus
Closed 6 years ago1
Possible missing line that sets SYSTEM_INTERRUPT_CLEAR to 0x00?
Closed 6 years ago2
Multiple devices
Closed 6 years ago1
Possible wrong register value?
Closed 6 years ago3
How to connect 2 and more sensors?
Closed 7 years ago3
Multiple Sensors
Closed 7 years ago
Is this a type error?
Closed 8 years ago1
Using multiple sensors on the same bus #2
Closed 8 years ago